BWS Posted March 6, 2022 Share Posted March 6, 2022 Hey everybody. I just (literally today) received my first Gibson! It is a brand new L-00 standard in vintage sunburst from Sweetwater. It’s incredible. The smell, the finish, the sound; it’s just perfect. Beautiful! I do have a question. I don’t see a two places to attach a guitar strap, is this normal for L-00? Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted March 6, 2022 Share Posted March 6, 2022 When I get a new Martin I usually need to install the button in the end on the guitar, as the strap button is in a small bag. You either need to install a strap button on your neck (I never do that). I do the shoe lace trick up by the nut. 1 Quote Link to comment Share on other sites More sharing options...
jedzep Posted March 6, 2022 Share Posted March 6, 2022 (edited) Some drill holes, wounding their guitars, but I use these loops attached behind the nut so the strap can be on/off'd easily. The other strap pin should already be installed at the very bottom.https://www.ebay.com/itm/391039173466 Edited March 6, 2022 by jedzep Quote Link to comment Share on other sites More sharing options...
sbpark Posted March 6, 2022 Share Posted March 6, 2022 You should already have one strap button installed down on the bridge end of the guitar. Gibson’s come with this strap button already installed ( this is a Gibson forum, not a Martin forum. Only Martin ships their guitars without the strap button installed). for attaching the guitar st the other end, you either need to secure it around the headstock or have a shop add a strap button to the heel )they’ll usually charge $20/25 to do this). 1 Quote Link to comment Share on other sites More sharing options...
Murph Posted March 7, 2022 Share Posted March 7, 2022 I drill and install a locking strap button. It's needed, it's simple and cheap. Quote Link to comment Share on other sites More sharing options...
BWS Posted March 7, 2022 Author Share Posted March 7, 2022 Hey, mystery solved. I looked through the cool stuff that Gibson had sent in the guitar case; and the other strap thing was in there. So I guess it’s an option if you want to attach it. But I’m not sure I can ever bring myself to screw this into this guitar. Lol. This is my first Gibson. I’m blown away. The smell, this finish. the clarity of how it sounds. Plays great too. I just love it. Thx everybody. Quote Link to comment Share on other sites More sharing options...
dhanners623 Posted March 7, 2022 Share Posted March 7, 2022 Welcome to Gibsonville. Here is Frank Ford’s page on the ins and outs of strap buttons: http://frets.com/FretsPages/Musician/GenSetup/StrapButton/strapbutton1.html I sometimes use “choker” straps (the strap that goes around the peghead) but the shoestring thing always struck me as cheap. When I lived in Kuwait, I had a shoe shop make some bona ride choker straps to my specifications. You can buy similar straps online, though. Quote Link to comment Share on other sites More sharing options...
QuestionMark Posted March 7, 2022 Share Posted March 7, 2022 Congratulations on the new guitar! QM aka “Jazzman” Jeff Quote Link to comment Share on other sites More sharing options...
BluesKing777 Posted March 7, 2022 Share Posted March 7, 2022 Congratulations to L-00 ownership! I was playing my Gibson Blues King L-00 when a friend was over, about 5 years ago, and he went away with THE FEVER. Seems like the next day, (wasn't) he was back with his Blues King! Mine on the right of photo, his on the left......(mine is 2007 bubinga back and sides/sitka, his is 2015 mahogany/sitka): BluesKing777. Quote Link to comment Share on other sites More sharing options...
fortyearspickn Posted March 7, 2022 Share Posted March 7, 2022 Back to the question, and in the woke spirit of Inclusivity: https://www.martinguitar.com/gear-accessories/guitar-parts-accessories/18A0089.html I have this on all my guitars. Quote Link to comment Share on other sites More sharing options...
RBSinTo Posted March 7, 2022 Share Posted March 7, 2022 The thing that most interests me is the smell of the guitar, which BWS described as "perfect". What exactly does the perfect guitar smell, smell like? I need to know so I can start guitar-sniffing the next time I visit the music store. Please and thanks, RBSinTo Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted March 7, 2022 Share Posted March 7, 2022 38 minutes ago, fortyearspickn said: Back to the question, and in the woke spirit of Inclusivity: https://www.martinguitar.com/gear-accessories/guitar-parts-accessories/18A0089.html I have this on all my guitars. As I was politely told a few post back, this is a Gibson Forum not a Martin Forum. How can you get the proper thump if you use that Martin product on a Gibson? Quote Link to comment Share on other sites More sharing options...
Kwlsky Posted March 7, 2022 Share Posted March 7, 2022 14 hours ago, Murph said: I drill and install a locking strap button. It's needed, it's simple and cheap. +1. I've done that on all of my guitars, and I'm always glad I did. Quote Link to comment Share on other sites More sharing options...
kidblast Posted March 7, 2022 Share Posted March 7, 2022 (edited) Staple gun ! "There I fixed it!" DOH kidding, of course. It is easy to do but I can understand if your a bit squeamish about drilling into the heel. I usually start with a smaller drill, and mark the depth of the screw (with the screw in the strap pin) on the bit. The mounting hole should be at about the mid point part of the body, on the floor facing side of the heel. You can pit a small piece of painters tape on the area if you are worried about the start of the hole. Once you have the smaller hole drilled to the right depth, mark the "regular" sized bit to the same depth. Be mindful of the angle you want that hole. When deciding what bit to use for the final hole, you can line up the screw to the bit, all you should see is the screw edges from behind the drill bit. You can put a small drop of liquid soap on the screw to help lube the screw as you set it in. You can also use felt washers so you're not abutting the metal of the pin to the Finish on the heel. Edited March 7, 2022 by kidblast Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted March 7, 2022 Share Posted March 7, 2022 22 minutes ago, kidblast said: Staple gun ! "There I fixed it!" DOH kidding, of course. It is easy to do but I can understand if your a bit squeamish about drilling into the heel. I usually start with a smaller drill, and mark the depth of the screw (with the screw in the strap pin) on the bit. The mounting hole should be at about the mid point part of the body, on the floor facing side of the heel. You can pit a small piece of painters tape on the area if you are worried about the start of the hole. Once you have the smaller hole drilled to the right depth, mark the "regular" sized bit to the same depth. Be mindful of the angle you want that hole. When deciding what bit to use for the final hole, you can line up the screw to the bit, all you should see is the screw edges from behind the drill bit. You can put a small drop of liquid soap on the screw to help lube the screw as you set it in. You can also use felt washers so you're not abutting the metal of the pin to the Finish on the heel. My rule of thumb is drills do not go near my guitars. Picks and capos and cases are allowed. Drills - nope. One slip and you better have a lot of tissues on hand. Quote Link to comment Share on other sites More sharing options...
kidblast Posted March 7, 2022 Share Posted March 7, 2022 (edited) 39 minutes ago, Sgt. Pepper said: My rule of thumb is drills do not go near my guitars. Picks and capos and cases are allowed. Drills - nope. One slip and you better have a lot of tissues on hand. I've done it dozens of times. I should mention that I worked at music store as a teacher back about 20 yeas ago. I'd help Dave (At the time, the co-owner and main tech) do small tech setup work now and then Change strings for students, do some mild setup work. and did a few of these strap pins. Never had a mis que (YET!) Edited March 7, 2022 by kidblast Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted March 7, 2022 Share Posted March 7, 2022 (edited) 2 hours ago, kidblast said: I've done it dozens of times. I should mention that I worked at music store as a teacher back about 20 yeas ago. I'd help Dave (At the time, the co-owner and main tech) do small tech setup work now and then Change strings for students, do some mild setup work. and did a few of these strap pins. Never had a mis que (YET!) That is great, but we have all seen those plastic surgery disaster women, and they were worked on my people who went through years of schooling and training, and are considered specialists in their field. Edited March 7, 2022 by Sgt. Pepper Quote Link to comment Share on other sites More sharing options...
BluesKing777 Posted March 7, 2022 Share Posted March 7, 2022 If you haven't drilled a strap button hole before, it is probably better to get a guitar tech to do it. Meanwhile you can use a boot lace tied to a guitar strap and the headstock. You can also buy a headstock leather tie to attach to your guitar strap and headstock: https://www.ebay.com.au/itm/302188271899?chn=ps&_ul=AU&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=302188271899&targetid=309727335774&device=c&mktype=pla&googleloc=9071459&poi=&campaignid=1669056926&mkgroupid=67513082834&rlsatarget=pla-309727335774&abcId=1123846&merchantid=264070019&gclid=EAIaIQobChMI0IiUxvm09gIVm30rCh3fYwOaEAQYAyABEgI14vD_BwE BluesKing777. Quote Link to comment Share on other sites More sharing options...
Dave F Posted March 7, 2022 Share Posted March 7, 2022 On 3/6/2022 at 1:32 PM, BWS said: Hey everybody. I just (literally today) received my first Gibson! It is a brand new L-00 standard in vintage sunburst from Sweetwater. It’s incredible. The smell, the finish, the sound; it’s just perfect. Beautiful! I do have a question. I don’t see a two places to attach a guitar strap, is this normal for L-00? How was the neck for you? As far as strap pin, I just sit when I play nowadays so it doesn't matter to me but when I did, I preferred adding the strap mentioned by Forty. I have guitars with and without the pin on the neck heel and balance-wise I prefer the balance of using a strap. The new 2022 Gibson I have came with a pin as yours. I doubt I'll be using it. Quote Link to comment Share on other sites More sharing options...
dhanners623 Posted March 8, 2022 Share Posted March 8, 2022 11 hours ago, fortyearspickn said: Back to the question, and in the woke spirit of Inclusivity: https://www.martinguitar.com/gear-accessories/guitar-parts-accessories/18A0089.html I have this on all my guitars. The issue I have with those gizmos that sit right behind the nut is that they interfere with my fretting hand if I’m playing in first position. I prefer the choker straps that allow you to run the headstock strap like this: Quote Link to comment Share on other sites More sharing options...
RBSinTo Posted March 8, 2022 Share Posted March 8, 2022 I've never heard anyone ever complain that the holes drilled through the bridge and soundboard top for the bridge pins are somehow wounding the instrument, so why on earth would drilling a hole at the base of the neck for a strap pin be considered to be a wound? And as for attaching one end of the strap however one does it at the end of the headstock, I feel that there is vastly more risk of damage ocurring if the strap is accidently snagged or tugged on than if the attachment is on a strap pin at the base of the neck. None of my four acoustics came with straps, and to attach them, I had strap pins installed (by a Luthier in each case) at the neck base. For me, the headstock base was never a consideration. RBSinTo Quote Link to comment Share on other sites More sharing options...
kidblast Posted March 8, 2022 Share Posted March 8, 2022 15 hours ago, Sgt. Pepper said: That is great, but we have all seen those plastic surgery disaster women, and they were worked on my people who went through years of schooling and training, and are considered specialists in their field. I wish had a photo of the ES-335 that came in one day where the owner had used a saber saw and removed the area on the back of the guitar where the volume and tone controls are. That 335 I believe was a pre 70's model. Oh the humanity! Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted March 8, 2022 Share Posted March 8, 2022 (edited) 2 hours ago, kidblast said: I wish had a photo of the ES-335 that came in one day where the owner had used a saber saw and removed the area on the back of the guitar where the volume and tone controls are. That 335 I believe was a pre 70's model. Oh the humanity! That’s priceless. I don’t understand why they don’t put control covers on ES’s. Going through the F-hole to change pots and caps is ridiculous. My BB had a cover but no F-holes. I guess that’s why. My tone did not suffer due to it. Edited March 8, 2022 by Sgt. Pepper Quote Link to comment Share on other sites More sharing options...
fortyearspickn Posted March 8, 2022 Share Posted March 8, 2022 12 hours ago, dhanners623 said: The issue I have with those gizmos that sit right behind the nut is that they interfere with my fretting hand if I’m playing in first position. I prefer the choker straps that allow you to run the headstock strap like this: Is that the one you had made? Quote Link to comment Share on other sites More sharing options...
Larsongs Posted March 8, 2022 Share Posted March 8, 2022 This is how it’s done…… Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.