Twang Gang Posted October 5, 2022 Share Posted October 5, 2022 I've got a Gibson with a nitro finish that has a sticky neck and it's been that way for a couple years. I've polished and cleaned it many times but it remains sticky so I want to try the lighter fluid trick on it, but I've never used it before. Wondering how to apply it? Cotton swab, microfiber cloth, cu-tips? Do you wipe if off after or just let it evaporate? A few tips from those that have done it would be appreciated. Quote Link to comment Share on other sites More sharing options...
slimt Posted October 5, 2022 Share Posted October 5, 2022 I would think naptha is chemical based. It may bite into the clear then you will have a mess. Try baby powder on the hands first or alittle bit of vasoline on the hands first. Sometimes acid in the hands can create a chemical reaction to finishes. Quote Link to comment Share on other sites More sharing options...
Rabs Posted October 5, 2022 Share Posted October 5, 2022 Yeah I have heard of people using that to get rid of build up from smoke.... Never tried it though but they say its about the only thing that works. Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted October 5, 2022 Share Posted October 5, 2022 Just put some on a rag and wipe. I did it to my HD-28V that had a sticky neck. Steve Ford recommend I use it. It won’t harm nitro, which is weird cause looking wrong at nitro affects it. 3 Quote Link to comment Share on other sites More sharing options...
jedzep Posted October 5, 2022 Share Posted October 5, 2022 I've used pure naptha to remove pickguard glue, ragging it on as above, but some scuz isn't affected by it. I've had success with Mr, Clean Magic Eraser, though, for sticky necks, using it as instructed with warm water. Then a wipe with warm water dampened cotton rag. Quote Link to comment Share on other sites More sharing options...
SteveFord Posted October 5, 2022 Share Posted October 5, 2022 Lighter fluid on a cloth won't hurt the neck finish, Just use a little bit on the cloth and buff it dry, it'll evaporate pretty fast. I've had two Firebird VIIs and both had sticky necks. The one I currently have took some polishing with Mother's Carnauba Wax (twice) and then just buffing it with a clean cloth after every time I played it. It took quite a while but it's finally slippery like it should be. Gibson recommends their pump polish but you'll still have to keep wiping the neck down until it finally cooperates. My guess is they put on too much paint and the underlying coats didn't have a chance to evaporate sufficiently before they gave it another pass with the gun. Quote Link to comment Share on other sites More sharing options...
Dub-T-123 Posted October 6, 2022 Share Posted October 6, 2022 Use a brand new or extremely clean rag and apply the naphtha or cleaning agent to the rag and then apply the rag to the guitar Any little particles that are stuck to an old rag are likely to make a bunch of scratches on your gloss finish so be sure to use a very clean rag. I don’t clean my guitars often so I use a brand new cloth every time Quote Link to comment Share on other sites More sharing options...
Twang Gang Posted October 6, 2022 Author Share Posted October 6, 2022 (edited) Thanks guys I'll give it try with a new micro-fiber cloth. Half an hour later: worked like charm, slick as ice!! Thanks again for the tips. Edited October 6, 2022 by Twang Gang 1 Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted October 6, 2022 Share Posted October 6, 2022 1 hour ago, Twang Gang said: Thanks guys I'll give it try with a new micro-fiber cloth. Half an hour later: worked like charm, slick as ice!! Thanks again for the tips. All is well again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.