Jump to content
Gibson Brands Forums

Robot Problem


gemnick

Recommended Posts

Yes a guy had that problem. Turned out he gently lifted the knob and tightened the shaft nut. Also he made sure that he had clearance by tightening the knob set screw high enough on the shaft. That cured the problem. He said he thought the loose nut was the main cause of the problem.

Link to comment
Share on other sites

Yes a guy had that problem. Turned out he gently lifted the knob and tightened the shaft nut. Also he made sure that he had clearance by tightening the knob set screw high enough on the shaft. That cured the problem. He said he thought the loose nut was the main cause of the problem.

 

 

Thanks for the info.......I will give that a try.

Link to comment
Share on other sites

Yes a guy had that problem. Turned out he gently lifted the knob and tightened the shaft nut. Also he made sure that he had clearance by tightening the knob set screw high enough on the shaft. That cured the problem. He said he thought the loose nut was the main cause of the problem.

 

Charliep.... That was it.....Thanks for your help :- ....I'm back on line.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...