Jump to content
Gibson Brands Forums

volume knob


MB the man

Recommended Posts

Make sure the knob hasn't been pushed down too far on the post, where it binds against the guitar top. (If you do use spray cleaner on your pots, make sure you avoid the cleaner contacting the guitar finish which can be damaged).

Link to comment
Share on other sites

You probably just need to get some "Control Cleaner/Lubricant" from Radio Shack and give them (it) a spray.

 

Make sure you get an electrical lubricant/cleaner.

Do not use anything like wd40 or any other greasy/oily lubricant.

 

If you haven't used the pot/control for a while grab a hold of it with the side of your hand/pinky finger and rotate the knob back and forward a few times. See if that works.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...