ichibanstar13 Posted June 16, 2010 Share Posted June 16, 2010 wats your favorite neck profile? Link to comment Share on other sites More sharing options...
L5Larry Posted June 16, 2010 Share Posted June 16, 2010 Is "Baseball Bat" an official description? I need something to grab on to, thin necks make my hand cramp up. You know that muscle that runs down the back of your hand between the thumb and forefinger... that's the one. Link to comment Share on other sites More sharing options...
Plymouth58 Posted June 17, 2010 Share Posted June 17, 2010 I prefer a V neck profile like the one on my Dean Leslie West Standard. But on the other hand, the thin SpeedTaper neck on my new Epiphone SG Prophecy is comfortable too. Link to comment Share on other sites More sharing options...
S t e v e Posted June 17, 2010 Share Posted June 17, 2010 50's rounded baseball bat style Link to comment Share on other sites More sharing options...
pippy Posted June 17, 2010 Share Posted June 17, 2010 My R0. I have three LP's that are all meant to have a '1960' style neck and yet they're all different thicknesses! Link to comment Share on other sites More sharing options...
bucketbot Posted June 17, 2010 Share Posted June 17, 2010 Not really that bothered about it....Have 2 Les Pauls, an Ibanez Jem, Carvin SH550, a Taylor Nylon string & recently an Ibanez 8 string all vastly different but don't have a problem adjusting to any of them. Link to comment Share on other sites More sharing options...
craigh Posted June 17, 2010 Share Posted June 17, 2010 I like the '50s baseball bat. Craig Link to comment Share on other sites More sharing options...
deepblue Posted June 17, 2010 Share Posted June 17, 2010 I like a thicker neck as well. My R9 is a serious plank of wood. So is my SRV neck. The Charvel however has a shredders neck, thin and flat. I like that too, but I do find my hand tires quicker. Link to comment Share on other sites More sharing options...
pippy Posted June 17, 2010 Share Posted June 17, 2010 The Charvel however has a shredders neck' date=' thin and flat. I like that too, but I do findmy hand tires quicker.[/quote'] I find that quite odd. Tires in what way, deepblue? When I tried out various R8's, 9's and 0's I played one R8 that had a particularly thick neck - even when compared to other R8's; it was like cradling half a drain-pipe! A few minutes of that one and I had hand-cramps on the inner side of my thumb. Even regular R9's felt too thick to be comfortable for extended play, but I've been told that you get used to it. I suspect most of the problem with me is that I have a bit of an odd left-hand technique. That's what comes with being self-taught, I guess; never learned the proper way! My R0 is half-way between my 1991 Classic (which has a very shallow profile) and what seemed to be the norm for an R9. It's the most comfy for me although the frets are a bit high and square. I wouldn't make the mistake of calling it a 'Fretless Wonder', that's for sure! Link to comment Share on other sites More sharing options...
MrRoundel Posted June 17, 2010 Share Posted June 17, 2010 When it comes to neck shapes/sizes, I'm like the princess and the pea. I gravitated towards Leo Fender era G&L guitars mostly because the ones I played had rather thin "C" shaped necks. After playing them for a couple of years, I had a neck replaced at the factory. The neck they replaced my thin "C" shaped neck with was a thick "baseball-bat-ish" neck. It hurt my wrist to play it for very long. I could never get comfortable with that thick neck and ended up selling the guitar. Fortunately, I saved the old neck, which wasn't unusable, and put in on a put-together ASAT III that is one of my favorite guitars today. I have another, later BBE-era G&L, that also gets my wrist hurting. My Epi Casino ('95 Peerless) has a very small, and comfortable "C" shape neck. However, due to the way I have to hold my wrist (fingernail/fingertip attachment problem that can't be rectified by "just cutting my nail") when playing, I have a hard time fitting my fingers well into frets on open chords. I had the same problem with a 330 Rickenbacker that I had. Like I said, the princess and the pea. My first Les Paul ('74 Deluxe/Std. HB's) purchased from an online auction two weeks ago, has a mahogany neck that would have my first instinct being to run away because it's a bit thicker than my G&L's. However, after starting to play it a lot, I've found that it's very comfortable for me, and my wrist hasn't hurt at all. I'm also finding that open chords that were hard for me to get clean fretting on, are easier due to the short scale neck. With newer, taller frets, I'd be in (Ma)hog heaven. This will happen soon. The long and short of it is that I generally prefer smaller "C" shaped necks on my guitars. Link to comment Share on other sites More sharing options...
drizzt Posted June 17, 2010 Share Posted June 17, 2010 I prefer the 50's neck too, the baseball bat that is. deepblue - Eric Clapton uses a soft V neck, at least that's what all his signature models have. Link to comment Share on other sites More sharing options...
ics1974 Posted June 17, 2010 Share Posted June 17, 2010 The Explorer neck profile. It's a hybrid between a 50's and 60's neck. It's by far the best neck I have played. Link to comment Share on other sites More sharing options...
lespaul339 Posted June 17, 2010 Share Posted June 17, 2010 I really don't have a preference. I have guitars with the 50's and 60's necks, v necks, and inbetween. Honestly I can get used to any neck as soon as I pick up a guitar. Link to comment Share on other sites More sharing options...
deepblue Posted June 17, 2010 Share Posted June 17, 2010 I find that quite odd. Tires in what way, deepblue? Pippy, maybe its because I attempt to do different things on the Charvel, such as fast runs or licks. I mean after all it is a Metal style guitar....but after a half hour or so I get hand fatigue that I dont get when I play my Gibson. A friend says it was to do with the slimmer neck and the design doesnt allow your palm area to spread out as much. deepblue - Eric Clapton uses a soft V neck, at least that's what all his signature models have. Drizz, that neck graphic is old. The original Claptons did indeed have a sharp V. I checked one out many years ago and found it very odd. The newer Claptons do as you say, have the softer V Link to comment Share on other sites More sharing options...
pippy Posted June 17, 2010 Share Posted June 17, 2010 Pippy' date=' maybe its because I attempt to do different things on the Charvel, such as fast runs or licks.[/quote'] You haven't heard the old adage about 'Old Dogs and New Tricks'? LOL! I know what you mean, though. I often find myself playing a different set of tracks when I use my '91 instead of my R0. Clearly different songs suit different LP's. I'll have to tell the wife I need more of them! Link to comment Share on other sites More sharing options...
Gibson4life Posted June 17, 2010 Share Posted June 17, 2010 I don't really have a preference. I usually adjust to any neck once I pick up the guitar. Though if I had to choose, I like my Strats's neck. It feels just right and my hand could play for hours and never get tired. Link to comment Share on other sites More sharing options...
S t e v e Posted June 17, 2010 Share Posted June 17, 2010 It feels just right and my hand could play for hours and never get tired. :) :- Link to comment Share on other sites More sharing options...
ichibanstar13 Posted June 17, 2010 Author Share Posted June 17, 2010 I like a thicker neck as well. My R9 is a serious plank of wood. So is my SRV neck.The Charvel however has a shredders neck' date=' thin and flat. I like that too, but I do find my hand tires quicker. [img']http://i28.photobucket.com/albums/c231/Toronto_Ontario/NeckProfiles.jpg[/img] dude i love that picture!!!! i'd LOVE to try the 57 "clapton" neck!!! Link to comment Share on other sites More sharing options...
ichibanstar13 Posted June 17, 2010 Author Share Posted June 17, 2010 :) :- dayyuuuumm!!! lmao Link to comment Share on other sites More sharing options...
ichibanstar13 Posted June 17, 2010 Author Share Posted June 17, 2010 I prefer the 50's neck too' date=' the baseball bat that is.deepblue - Eric Clapton uses a soft V neck, at least that's what all his signature models have.[/quote'] his most famous strat "Blackie" was a partscaster that he made and the neck he used was a "hard V" shape from a '57. the signature model is YET ANOTHER strat he actually ordered from fender...i believe he actually ordered six, which are the 6 finishes u can get with that signature model. that signature model has the "soft V" neck.. Link to comment Share on other sites More sharing options...
bluesguitar65 Posted June 17, 2010 Share Posted June 17, 2010 I prefer the fat 50s neck profile. Link to comment Share on other sites More sharing options...
BigKahune Posted June 17, 2010 Share Posted June 17, 2010 I've got a wide variety of necks in my collection and I've got no problems playing any of them. My favorite would be like the 60s Gibson type. Next is the "baseball bat", and then the shredder type with a C shape and compound radius (like 12 to 16). Link to comment Share on other sites More sharing options...
jamman Posted June 18, 2010 Share Posted June 18, 2010 I like the 60's slim tapper and than the 59. I have 2 R0's ,the 356 and the 05 faded with a 60's silm. I have to ajust to the 59, that takes about 30 minutes. I find if i play it every other day, it takes les time to ajust to. But the tone that comes from the 59 neck is better, so it worth the hassle of getting ajusted to it. My Gear :-) ‘10 LP R0 50th Anniversary Version 3 1/500 (Cherry Burst) ‘09 LP R9 50th Anniversary (Heritage Dark Burst) 1/500, Bought 4-2010 new ‘10 PRS 25th Anniversary Santana Model ,10Top / Santana Yellow ‘09 LP R9 50th. Anniversary 1 of 59 (Rust Burst) ‘09 LP R0 Standard Ebony VOS ‘09 “Wildwood” CS - 356 Quilted maple & Korina ‘05 Les Paul Standard Faded T.B. ‘08 50th comm.edition, G.O.M. Flying V ‘08 July G.O.M. Longhorn Double Cut BV (Trans Blue) ‘08 Firebird VII (metallic red) ‘08 Fender Stratocaster ‘70’s reissue (black / rosewood neck)(Fat‘50’s pups) ‘08 Fender Stratocaster ‘70’s reissue (natural / maple neck) 1999 MIM Fender Stratocaster ’70’s reissue (white / maple neck)(‘69 pups) 1987 Japan Squier by Fender, Stratocaster (white / maple neck) 1986 Ovation Model # 1767-Legend ‘08 Marshall JVM 210H - 1960 AX Cabinet ‘10 Fender Blues Deluxe reissue And some pedals Link to comment Share on other sites More sharing options...
Daryl M Posted June 18, 2010 Share Posted June 18, 2010 I wasn't sure I'd like it at first, but I really like the asymmetrical neck on the Standard. Especially if you play for fairly long periods of time. Link to comment Share on other sites More sharing options...
AXE® Posted June 18, 2010 Share Posted June 18, 2010 These. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.