Follow It Home Posted March 26, 2008 Share Posted March 26, 2008 Are the turretboards marshall mod and the bitmo trio mods compatible? I was thinking about getting a loaded marshallized board (only because I dont think I could wire a whole board :-P) but was planning on getting the trio very soon the marshallized later. So I just dont want to waste my trio, Thanks. Link to comment Share on other sites More sharing options...
bluefoxicy Posted March 26, 2008 Share Posted March 26, 2008 Yeah, they pretty much just wire together. Cap C4 gets removed by the trio; get creative, maybe desolder it and replace a cap on the trio with it? Besides that, there's no component changes, just some tapping in at certain points. You will have issues desoldering the Trio from the current board, but not much. I soldered my Trio by tinning the wire and the target component (put a little solder on each), then bringing them together and using the iron to join them (no added solder). The iron will separate these fine without a desoldering braid. No looping through anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.