TheX Posted April 13, 2008 Share Posted April 13, 2008 Where can I find out the actual size (shaft/hole diameter) so that I can find replacements? They are VERY close together as well and I think I found the ones that would work as far as overall size is concerned. I'm going with all chrome hardware, and the Grover GX1241 mini's seem like a good alternative. The Grovers are .391 = 25/64 drill bit. Here's the guitar they'd be going on. Link to comment Share on other sites More sharing options...
glenn c Posted April 13, 2008 Share Posted April 13, 2008 Take one of the tuners off and measure. I'm pretty sure that the opening will be 10mm, which is slightly larger than .391. The Grovers should fit fine. Link to comment Share on other sites More sharing options...
TWANG Posted April 13, 2008 Share Posted April 13, 2008 does that have kluson type tuners.. with the square shape on the back of the headstock. screw holes in the middle.. If they are Klusons with that button are available. Grovers minis fit on lp100s, g310s, and lp studios.. and I'm sure they'd fit on yours, too. It's a question of screw holes lining up..some guys I sell to are picky about that, others just want a different set of tuners or brand and don't care. TWANG Link to comment Share on other sites More sharing options...
13yguitarman Posted April 13, 2008 Share Posted April 13, 2008 You should get the tuners that hide behind the headstock. hey how does that guy tune without any tuners. amazing!!!!! Link to comment Share on other sites More sharing options...
TheX Posted April 13, 2008 Author Share Posted April 13, 2008 It has grover style tuners on it now so lining up isn't a problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.