geetar playr Posted June 22, 2008 Share Posted June 22, 2008 Does anyone know if these tuners would fit an SG G400? http://store.guitarfetish.com/gosttuchwimo.html Link to comment Share on other sites More sharing options...
RotcanX Posted June 22, 2008 Share Posted June 22, 2008 If your G-400 has the 'Grover' tuners, those will drop right in. If it has the older keystone tuners, you'll need to enlarge the post holes first. Link to comment Share on other sites More sharing options...
geetar playr Posted June 22, 2008 Author Share Posted June 22, 2008 Thanks!!! I didn't forget your suggestions on other tuners, but I wanted to see about other economical options:-k Link to comment Share on other sites More sharing options...
jcwillow777 Posted June 22, 2008 Share Posted June 22, 2008 With the screw hole off the side, you will have some uncovered screw holes on the back of your head stock. I just ordered some of these for my G-400 and the screws holes on the back are not only totally covered, they line up perfectly. I had to get the larger bushing and slighly enlarge the hole, but they look great, and still onder $30! http://store.guitarfetish.com/3x3vikegkekl.html and the bushings: http://store.guitarfetish.com/vitucobu.html I bought the Grover Vintage Green Kestones for 4 other Epis, I decided to save a couple of buck this time. The Grovers didn't totally cover the screw holes on the back of the head, these did. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.