Jump to content
Gibson Brands Forums

Are the Saddles Glued in......


Soupy1957

Recommended Posts

On the current models "Hummingbird" and "EJ200" ......I'm thinkin of taking a few thousands (.005 or so) off the bottom side of the saddle on the Hummingbird, since the strings seem just a tad high on the 12th fret.

 

The action at the first fret is a hair-width and the neck seems straight enough...

 

-Soupy1957

Link to comment
Share on other sites

Here is another site that is very helpful when it comes to acoustics.

 

http://frets.com/FRETSPages/pagelist.html

 

I don't have any experience with Epi or Gibson acoustics, but I did have a number od Washburn and this site was very helpful.

 

Measure your height at the 12th and whatever it is you want to lower it, you remove doouble that from the bottom of your saddle.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...