Jump to content
Gibson Brands Forums

Rockstand Guitar Stands?


metalhed717

Recommended Posts

i've been looking at the one that holds seven and fits in a corner, but does anyone have one? about how big are they? also, i saw on one site that it is not recommended for nitro laquer finishes (this is what is used on epi's right?). should i be worried about this?

Link to comment
Share on other sites

I haven't used a "seven-in-a-corner" model, but I have used a "five-in-the-center-of-a-room" model, and I thought it was really nice.

 

The one I used was about two feet long, one foot wide. The neck support was about two feet off the ground.

 

I don't know if this is an issue for you, but full-size acoustics or non-thinline archtops take up two slots, because the bodies are twice as thick.

 

Nitro finishes are used on vintage Epiphones, US-made Gibsons, and US-made Fenders.

 

Modern Epiphones (and non-US Fenders) use poly finishes.

Link to comment
Share on other sites

I don't know if this is an issue for you' date=' but full-size acoustics or non-thinline archtops take up two slots, because the bodies are twice as thick.

 

Modern Epiphones (and non-US Fenders) use poly finishes.[/quote']

 

i have one acoustic which is part of the reason im going for the seven instead of five (getting ready for the fifth guitar) plus it'll give me room to grow. thanks for the info about the finish, i always get them mixed up

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...