Jump to content
Gibson Brands Forums

Noise in the tone control knobs


BusterBuck

Recommended Posts

Posted

I would first try some contact cleaner (Radio Shack) and see if that takes care of the problem. Epi pots are not known for being the best (and by no means the worse), but an investment in contact cleaner won't hurt and you can always use it down the road.

Posted

a sometimes easier fix.

turn knob down all the way.. pull slightly on knob while turning to ten

then keep pulling up and turn down.

 

repeat pushing on the knob and do it both ways.

 

you can repeat this a few times.. even going back and forth in the turning. and it cleans itself, very often.

sometimes it's just a spec of something, or the path not quite connecting and that fixes it up.

 

TWANG

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...