Jump to content
Gibson Brands Forums

Neck adjustments for bigger strings???


yamatsuka

Recommended Posts

Posted

I put Power Slinky´s on my LP some time ago and read on several sites that you need to adjust the neck for bigger strings. Is this really needed, because it really sounds fine to me and can´t notice difference from lighter strings.

Posted

If its playing ok that's fine, but heavier strings mean more tension..the truss rod may need a little adjustment if the neck bows inwards. Also the nut may need little work to stop the strings from snagging...A few thoughts, but if it aint broke don't fix it....Chris

Posted
If its playing ok that's fine' date=' but heavier strings mean more tension..the truss rod may need a little adjustment if the neck bows inwards. Also the nut may need little work to stop the strings from snagging...A few thoughts, but if it aint broke don't fix it....Chris[/quote']

 

So basically leave it this way and if something would happen, fix it?

Posted

Yeah...if it tunes up ok and the action hasn't changed significantly...I'd say there's nothing to fix. Try looking down the length of the neck...as long as it doesn't bow inwards more than a very slight amount then its fine....Chris

Posted

If the string height and playability is still ok, the new strings didn't bow the neck enough to change the string height. You would have noticed that the strings were higher and hard to press down imediately. If it ain't broke, don't fix it, although a setup at a local guitar shop that has a luthier might surprise you interms of playability.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...