Jump to content
Gibson Brands Forums

HNGD - Epiphone Sheraton II


AldoMcD1

Recommended Posts

The only thing I see that I'd change.. is the tuners.

I left my korean sheri tuners in for many years.. but when I swapped out to grovers I was really happy with both the look

and the tuning ease.

Made a very good difference.

 

sorry for fuzzy pics

 

blondyheadstock.jpg

blondyheadrear.jpg

 

you don't have to get imperial knobs.. but I really like them on the sheri headstock

 

TWANG

Link to comment
Share on other sites

aldo' date=' have you won it on ebay? if so you might be lucky one who outbid me '](*,)

 

I did - bought it on the 5th April. I don't know if its the same one as there have been a lot for sale recently.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=120398916451

 

There is a beautiful Sheraton on eBay just now which is worth a look:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250409308613

Link to comment
Share on other sites

I've put in bigsbys.

The only thing holding you up is how to cover the tailpiece bushing holes.

some have gone with..

leaving them along..

putting a straight piece across the two.. some with logos or 'custom made'.

and I like the idea of abalone, to match the inlays, dots.

 

Otherwise it's just a question of drilling the holes on the end..

now.. sometimes the strap button hole isn't perfectly lined up..

so if you put the tail screw hole in line with it.. your strings wouldn't line up with the bridge saddles.

in that case you put a dowel in the original hole.. line up your tailpiece correctly and drill a new hole for that.

 

It's a good idea to string some kite string from the low e tuner peg..through the low e on the tail..over to the high e on the tail.. then back

up to the high e

peg.. you can be sure of string alignment that way.. and then just cut the string off.

 

you can tighten this using the tuner peg, too. just tape the tail at the bottom with masking tape and don't make it so tight on the string

that it pulls it up.

After you get the first screw in.. tighten it some more to be sure it's exactly how you want it..

 

TWANG

Link to comment
Share on other sites

Veeeeeery sexy guitar!!!

 

I would like to install a gold frequensator tail piece on the guitar.

 

Has anyone on the forum done this before?

 

Don't do it, mate. This guitar is very versatile--it can sound hollow or it can sound solid. You will lose some of this with a trapeze tailpiece. Stick to the stop tailpiece. Cheers.

Link to comment
Share on other sites

 

I did - bought it on the 5th April. I don't know if its the same one as there have been a lot for sale recently.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=120398916451

 

There is a beautiful Sheraton on eBay just now which is worth a look:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250409308613

 

yeah' date=' when I opened the first one it came up with the message: "Sorry, but you've been outbid on this item" :-$

 

lucky bastard default_eusa_wall.gif

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...