mr_goodbomb Posted June 3, 2009 Share Posted June 3, 2009 I want to swap by black tuneomatic and stopbar, and tuners, for chrome ones. Everything on Ebay says "Gibson/Epiphone," but I'm told that Gibson and Epi use two completely different measurements. I want to find a set on the cheap, so I'm really looking for a good price, but I need to find some that FIT! What sizes am I looking for? Why is all this stuff labeled Gibson AND Epiphone when they use different sizes? Urgh. Link to comment Share on other sites More sharing options...
jagg11 Posted June 3, 2009 Share Posted June 3, 2009 I hope this doesn't apply to Lp's I just ordered 75.00 worth of Gibson hardware for an Epi Lp Link to comment Share on other sites More sharing options...
mr_goodbomb Posted June 3, 2009 Author Share Posted June 3, 2009 I believe it does. I'm sure you can return it if it does. Maybe someone else here can answer us. Link to comment Share on other sites More sharing options...
Ron G Posted June 3, 2009 Share Posted June 3, 2009 Good stuff at GuitarFetish that many of us have been quite satisfied with. Pretty sure the following, for example, will fit. Bridge: http://store.guitarfetish.com/labutustchbr.html Tuners: http://store.guitarfetish.com/fusigrch3x3t.html I'm pretty sure those tuners are Jinho brand, same as stock Dot Studio (they're what's on my DS) Look around their site at the other stuff, too. Email Jay with questions as to fit, etc. Link to comment Share on other sites More sharing options...
mr_goodbomb Posted June 3, 2009 Author Share Posted June 3, 2009 So there's the TOM. Will their normal stopbar fit? They offer two sizes of TOM but one of stopbar, which I found weird. Link to comment Share on other sites More sharing options...
Ron G Posted June 3, 2009 Share Posted June 3, 2009 Reread the last line of my reply. (I would have the same question) Link to comment Share on other sites More sharing options...
TWANG Posted June 3, 2009 Share Posted June 3, 2009 I've swapped out plenty of bridges on epis. and I've sold quite a few rollers that fit right in. the only problems I've hit are the sheraton II's from Korea. odd stuff there. I redid my dot studio.. and used a schaller, which was a major pain and I didn't have to do it. they come in metric so gibson, usa size, don't fit. some of the tails however will fit. Tuners will usually be grovers.. it's really a question of whether they have press fit bushings, or screw in. those aren't interchangeable. You can search a few pages back for my Big Red thread and see new tuners, tail and bridge as well as some other things, and I have all those part numbers and can tell you what to expect in replacements. Just pm me. TWANG Link to comment Share on other sites More sharing options...
mr_goodbomb Posted June 3, 2009 Author Share Posted June 3, 2009 So, are the Dot Studios suffering from the same incompatability issues as the Sheratons? Or will Gibson USA-fit stuff fit on them? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.