motster Posted January 30, 2010 Share Posted January 30, 2010 I have searched without luck...trying to get the specs on height from the 12th fret on Epiphone masterbuilts Link to comment Share on other sites More sharing options...
motster Posted January 30, 2010 Author Share Posted January 30, 2010 http://www.gibson.com/en-us/Support/TechSupport/Instrument%20Information%20Guide/Action/ I think I may have found the answer Here's a link to GIBSON specs Link to comment Share on other sites More sharing options...
Bigsound Posted January 30, 2010 Share Posted January 30, 2010 Hi motster, I got EF model with original action specs: 1st string 12fret 2,1mm 6st string 12fret 2,7mm (25,4mm=1 inch) Link to comment Share on other sites More sharing options...
The_Buffalo Posted January 31, 2010 Share Posted January 31, 2010 First string, about 5/64". 6th string, about 7/64, although that;s just a guide. Go to the hardware store and get a 5/64 & 7/64 drill bit & use the round end (the part that goes in the drill) as a guage to see where you stand. Link to comment Share on other sites More sharing options...
motster Posted February 2, 2010 Author Share Posted February 2, 2010 Thanks BIG SOUND and The_Buffalo Good stuff. Now for a slight neck adjustment. Take care dudes Link to comment Share on other sites More sharing options...
The_Buffalo Posted February 3, 2010 Share Posted February 3, 2010 ...Now for a slight neck adjustment... Go to www.frets.com & go to the owner's manual section. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.