Sklivas Posted March 6, 2010 Share Posted March 6, 2010 I'm looking for a more strat-style sound out of my dot, but i'm not sure how I can do this. The most obvious way wound be to change pickups. Any ideas? I'd like to keep it simple, so no vari-tone curcuits or anything... just something someone with limited wiring skills (and budget) would be able to acomplish... thx Link to comment Share on other sites More sharing options...
Sklivas Posted March 6, 2010 Author Share Posted March 6, 2010 true... I'd like to get both sounds out of the one guitar, probably strat off the bridge and leave the standard humbucker in the neck... and as stupid as it sounds, 2 guitars would not work for me right now Link to comment Share on other sites More sharing options...
deflepfan Posted March 6, 2010 Share Posted March 6, 2010 Unable to give any assistance on this one, but just wanted to say welcome! I am assuming your avatar is your Dot? She is gorgeous and love that blue!! Sheila Link to comment Share on other sites More sharing options...
Sklivas Posted March 6, 2010 Author Share Posted March 6, 2010 Thx! Nah, it's not my dot, I wish I could get the blue, but cherry is the only colour that they make left-handed:/ Link to comment Share on other sites More sharing options...
jammybstard Posted March 6, 2010 Share Posted March 6, 2010 Look up Coil tapping with Push-Pull knobs. should give you what you want! Link to comment Share on other sites More sharing options...
Bender 4 Life Posted March 6, 2010 Share Posted March 6, 2010 Look up Coil tapping with Push-Pull knobs. should give you what you want! push/pull coil tap is the way to go........perhaps a mini toggle instead of push/pull though, it would cost less. Link to comment Share on other sites More sharing options...
Doc Helliday Posted March 6, 2010 Share Posted March 6, 2010 hey, im curious as to what you mean by strat like tone. do you mean 'thinner' and "twangier" cos if thats the case i would say play right next to your bridge. The Dot's scale length is shorter then a strat so that could play a role in the strat's tone. Link to comment Share on other sites More sharing options...
Sklivas Posted March 6, 2010 Author Share Posted March 6, 2010 first, thx for the suggestion(s)! by more strat-like I guess I mean twangier... I (or at least try my best to) play a lot of clapton and that style of music. I'd like to have a more "piercing" sound if that makes any sense. Link to comment Share on other sites More sharing options...
Sklivas Posted March 6, 2010 Author Share Posted March 6, 2010 wait, so can I tap the standard pup that comes with the dot?? or do i have to get different ones? If anyone done this with those pickups, what does the sound end up like? Link to comment Share on other sites More sharing options...
Doc Helliday Posted March 6, 2010 Share Posted March 6, 2010 idk of anyone who has tapped them if you want a single coil tone i would suggest GFS Dream 90s ive heard them described as a "strat pup in a humbucker housing" or the Mean 90 (which i have and LOVE) for a little more ballsy P90 tone sorry options are endless. I personally have TV Jones Classic pickups in my Dot to get this sort of sound http://http://www.youtube.com/watch?v=ZoG62Wi8twU Link to comment Share on other sites More sharing options...
gearhead Posted March 6, 2010 Share Posted March 6, 2010 Your stock pickups most likely have 2 wire leads, so without a little experience you've got a problem. I you replace the pickup, be sure you get one with 4 wires so you have all tonal options! Link to comment Share on other sites More sharing options...
Bender 4 Life Posted March 7, 2010 Share Posted March 7, 2010 you can google Gibson wiring diagrams for a few different ways to tap a hummer to single coil..........I did it on my old GLP once, simply de-activated half the p'up (no toggle, full time single) but restored it to origional after a cpl of yrs. Link to comment Share on other sites More sharing options...
TP Posted March 7, 2010 Share Posted March 7, 2010 You need a four wire lead to do a coil tap... My Schecter has Duncan designed humbuckers with a coil tap switch. It does seem to give the guitar more Strat like tones when tapped, especially in the middle position you can get a little bit of the Strat Quack and chime. While it is close, it ain't no cigar.... You can get the Tele "Twang" better than the Strat "Quack" if you know what I mean. I like having the options with the coil tap, but if your looking for true Strat tones, I think you may come up short on a Dot with coil tapping. Link to comment Share on other sites More sharing options...
HarpBoy Posted March 7, 2010 Share Posted March 7, 2010 Have you thought about getting a pedal of some sort? Wiring/pickup modifications in semi's and hollowbodies are not as easy as in solidbodies and if you get a pro to do it, you're probably going to end up spending as much as a basic pedal anyway. I use one call the Janglebox, which is a compressor/sustainer designed for a jangle-ish vibe, but it's a little expensive. If you're a "bedroom player" right now, you might want to consider some kind of modeler, like that little Pocket Pod or something like that to start with. They're pretty versatile. Good luck, and welcome to the forums. Link to comment Share on other sites More sharing options...
AS90 Posted March 7, 2010 Share Posted March 7, 2010 I bought a Chinese Squier Strat for £40, whacked in some full size Alpha pots, Sprague orange drop cap, new input jack and switch and gave it a good setup. I now have an great playing Strat (with all the 'stratty' tones you need) which cost me £55 in total. Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2010 Share Posted March 7, 2010 I bought a Chinese Squier Strat for £40' date=' whacked in some full size Alpha pots, Sprague orange drop cap, new input jack and switch and gave it a good setup. I now have an great playing Strat (with all the 'stratty' tones you need) which cost me £55 in total.[/quote'] Now that sounds like a problem solver...... Link to comment Share on other sites More sharing options...
Fadedepi Posted March 7, 2010 Share Posted March 7, 2010 Just stick a GFS "Mean 90" in the bridge position , and be done with it. Believe me, this is you're best and cheapest option. Or, maybe reverse that. Put a neck position "Mean 90" in the neck and leave the better of the 2 Epi HB's in the bridge. Faded... Link to comment Share on other sites More sharing options...
Sklivas Posted March 7, 2010 Author Share Posted March 7, 2010 Thx for all the tips! I think I'm down to two options- the mean 90's or this with any legit strat pup inside... (is that do-able; i.e. is the wiring structure the same?) Thank you all again :) http://www.guitarpartsresource.com/covers_adapters.htm Link to comment Share on other sites More sharing options...
antwhi2001 Posted March 7, 2010 Share Posted March 7, 2010 I suspect that the Clapton sound you want is the sound of 2 single coils out of phase...the sound you get at positions 2 and 4 on a 5 way Strat switch (eg the Layla album sound). You need a guitar with at least 2 single coil pups to get that tone...it's not going to happen for you on a Dot. Wrong tool for the job. A Dot with single coil at bridge and humbucker at neck isn't going to work. The bridge would sound weak and out of balance. If you're on a limited budget sell the Dot and buy a Squier Strat with a 5 way switch. Link to comment Share on other sites More sharing options...
AS90 Posted March 7, 2010 Share Posted March 7, 2010 If you sell the Dot you can buy a MIM Fender. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.