acdcman2345 Posted July 26, 2011 Share Posted July 26, 2011 Hello everyone. I'm looking for some info to set up my sg.....how high does the bridge news to be? I can't find that info anywhere. How high do o put the two nuts below the bridge. Braided that what should I so?? Hope to get some good info. Link to comment Share on other sites More sharing options...
vexorgtr Posted July 26, 2011 Share Posted July 26, 2011 This link should help. http://mediawebsource.com/guitar/setup.htm Link to comment Share on other sites More sharing options...
BigKahune Posted July 26, 2011 Share Posted July 26, 2011 . Setup info and instructions from the Gibson website - http://www.gibson.com/en-us/Support/TechSupport/Repair%20Columns/Basic-Guitar-Setup/ Regarding the Stop/Tailpiece - The height of the stopbar tailpiece is personal preference - the lower the tailpiece, the more sustain—the higher, the less sustain. For the most sustain> To get the sharpest break angle, adjust the Stop to the lowest point at which none of the strings touch the back edge of the bridge. Gibson factory specs - .10 gauge strings; string heights - 1st fret- treble side - 1/64" 1st fret- bass side - 2/64" 12th fret- treble side - 3/64" 12th fret - bass side - 5/64" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.