davefeinstein Posted July 31, 2011 Share Posted July 31, 2011 I just purchased a used Epiphone ej-160. While I was setting it up the truss rod needed a minor adjustment. I got the wrench that fits my EJ-200 but it didn't fit. I went down to the local hardware store and purchased an allen wrench set and none of those fit either. Is it metric? Please help. Link to comment Share on other sites More sharing options...
Bookkeeper's Son Posted August 1, 2011 Share Posted August 1, 2011 I'm pretty certain that it's 4mm, like many other guitars. Mine has fit everything I've owned (no USA models). Link to comment Share on other sites More sharing options...
RIX Posted August 6, 2011 Share Posted August 6, 2011 I went to Lowes and they have Allen wrench sets in metric and standard sizes. What I liked about the metric set it came with 4mm and 4.5mm sizes. I brought both sets, so I should be able to handle most guitars. Link to comment Share on other sites More sharing options...
bonzoboy Posted August 6, 2011 Share Posted August 6, 2011 I have a Cruz Tools Groovetech guitar tool kit and it has everthing included for guitar setup,including an instruction booklet and metric and SAE allen keys and any other tools you'd need.You can pick them up for about $50 which is far less than you'd spend if you bought all the tools separately. Link to comment Share on other sites More sharing options...
insulinboy Posted August 12, 2011 Share Posted August 12, 2011 its a 5/32 on mine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.