Steve Tr Posted August 22, 2011 Share Posted August 22, 2011 Hello, I have an SG Classic and I am changing out the P90’s with DiMarzio Virtual P90’s. Each pickup has 5 wires – red, green, black, white and bare. I want to set them up with push/pull volume pots to get three way switching with series / parallel output. I found a good diagram on SD’s Website (http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_3w_ssp), but of course this is for SD Humbuckers. I cannot find anything on the Dimarzio website that makes sense to me or that comes close to the Seymour diagram. Would the hookup be the same for the DiMarzio’s as shown for the SD’s? Is the wiring designation the same? This is a bear to wire in the first place and I don’t want to have to re-wire it. Thanks. Link to comment Share on other sites More sharing options...
DiamondJig Posted August 22, 2011 Share Posted August 22, 2011 you can use the SD wiring just match the DiMarzio colors up http://www.dimarzio.com/sites/default/files/blog/4conductor.pdf the bare wire is a ground Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.