Jump to content
Gibson Brands Forums
Sign in to follow this  
EpiXplorah

explorer wiring issue

Recommended Posts

hey whats up guys this is my first post just joined the board today. I joined the board because I own a Epiphone explorer and have some questions about it. I appear to be having a particular issue with the wiring and was wondering if this issue just pertains to Epiphone explorer's or to gibson's as well. If you own one or both and Epi and Gibson explorer try this out and see if you too have the same problem...

 

If you have all the volume and tone controls on 10 and have the neck pickup selected and the distortion channel of your amp on (makes the bleed more pronounced) turn the neck volume down to zero.. does your bridge pickup even though not selected bleed through to the amp? This also works when you have the bridge selected and turn that volume down if the neck volume is on it will bleed through as well. Both volumes need to be at zero or else you will experience annoying signal bleed through one of the pickups!

 

I had a korina explorer that had a set of dimarzio's installed professionally that did the same thing. this particular guitar happens to be a epi goth I picked up for $200 and threw a spare set of emg's in. I suspect the problem is with the toggle switch and I have a new switchcraft 3 way toggle on the way in the hopes of eliminating this problem for good. so if you can test out your guitars and get back to me that would be greatly appreciated

 

I will probably post this in the gibson and epiphone sections as well

 

thank you

 

Kevin

Share this post


Link to post
Share on other sites

so far,and unluckyly,I have owned only an epi,despite I'm dreaming of a gib' explo since I was 16,and I'm now 41!

Anyway;my epi explo never acted the way you describe,and as far as I know,never did a gibson,wich all more ore less have similar electric circuits.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...