Bjorn Hreinsson Posted January 4, 2012 Posted January 4, 2012 Hello Is there anybody who could help me. I got a Gibson bass guitar serial no. 122442. I think it is a Ripper. The wiering has been messed with and i wanna fix it, have it original. Can i find a schematic of the wireing or maby a photo. Hope somebody can help me. Bjorn.
Searcy Posted January 4, 2012 Posted January 4, 2012 If it's a ripper here you go. Wiring from a 1976 Ripper Wiring from a 1978 Ripper
Bjorn Hreinsson Posted January 4, 2012 Author Posted January 4, 2012 Thank you, is this original wireing ???
Bjorn Hreinsson Posted January 4, 2012 Author Posted January 4, 2012 The photo does not match the drawing.Look at how the capasitors are connected.
Searcy Posted January 4, 2012 Posted January 4, 2012 The drawing is from 1973. The picture you saw is from 1978. I have added another picture from 1976. It seems there were a few changes over the years that are not reflected in the drawing.
Searcy Posted January 4, 2012 Posted January 4, 2012 Yes, there are some small changes depending on what year the bass was built. Here is a drawing made of the woring of a 76 Ripper This is a drawing of a modified 78 Ripper. I have an old 78 out in my shop that I'm plannign to rebuild. I'll see if I can find the wiring for it this week. We need to figure out what year your bass is.
Rickbc3 Posted January 17, 2012 Posted January 17, 2012 Yes, there are some small changes depending on what year the bass was built. Here is a drawing made of the woring of a 76 Ripper This is a drawing of a modified 78 Ripper. I have an old 78 out in my shop that I'm plannign to rebuild. I'll see if I can find the wiring for it this week. We need to figure out what year your bass is. Hi my name is rick and I'm new to the forum. I have a question about your 74/76 alder ripper schematic. I have a 76 ebony ripper bass that is in need of a great deal of repair with the wiring. what is the red and white cap in the 74/76 schematic? thank you! here is a few pics of the bird nest wiring in my ripper
Pudge921 Posted February 11, 2012 Posted February 11, 2012 Hi,I'd like to jump in. I just rewired a modified ripper but the volume and tone controls now have minimal dynamic range and the vol won't shut off completely. The caps are .047 and .1. I've attached pics. Would appreciate suggestions on trouble shooting. I'm thinking we fried a pot (or 3); first soldering job...Sorry for barging in and thanks for any help. Btw, the 0.1 cap seems physically huge compared to the original and photos of some other caps I've seen. Also, the pups are Bartolini hi-a, so i'm not sure the choke is really needed.... I wanted to share an album on Photobucket with you! http://photobucket.c...88/doug921/maya bass/band/new wiring I wanted to share something on Photobucket with you! See the fullsize version at: http://s1117.photobucket.com/albums/k588/doug921/maya%20bass/band/new%20wiring/?action=view¤t=a19bf396.jpg&evt=user_media_share
Recommended Posts
Archived
This topic is now archived and is closed to further replies.