sboiir Posted January 19, 2012 Share Posted January 19, 2012 I came across some bone material hoping to use as a saddle, but it is too short to reach the full width for all 6 strings as the saddle. Can each string have it's own piece of bone under it, with maybe a separate piece of bone used as a spacer ? Does that make sense ? (I'm sure I'll get comments about the short bone deal....hahaha) Link to comment Share on other sites More sharing options...
Jeremy Morton Posted January 19, 2012 Share Posted January 19, 2012 That will end up being quite difficult to do and possibly problematic. The individual heights will be hard to dial in. If you have an under saddle PU it may not agree well with that setup either. Go to Stew Mac and order a bone blank or 2 or three and do it properly. JM Link to comment Share on other sites More sharing options...
jedzep Posted January 19, 2012 Share Posted January 19, 2012 Yup! The fragmented saddle will drive you insane. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.