denny21 Posted February 5, 2012 Share Posted February 5, 2012 I'm having trouble with my Les Paul 100. A couple of months ago the I couldn't get any sound when switched to the bridge pickup. I tried spraying contact cleaner in the switch and it didn't help. This lasted for about a week and then it started working again. Now I get nothing when switched to the neck pickup. I took the switch out and cleaned the contacts and made sure they were touching when closed. I only get sound from the bridge pickup when the switch is in the bridge pickup position. I'm wondering if there is a problem with my neck pickup. I pulled the cover off and checked for broken wires and pulled the neck pickup but I don't see any problems and I don't know what else to check. Any help would be appreciated. Link to comment Share on other sites More sharing options...
EpiphoneFan1989 Posted February 5, 2012 Share Posted February 5, 2012 I´m sorry for your problems. You can go to a guitar store and ask an expert. This is the easiest way in my opinion. Link to comment Share on other sites More sharing options...
SNick Posted February 6, 2012 Share Posted February 6, 2012 Clean your pots also. Check your wires cause it could be a bad solder joint on a ground wire. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.