Kyler Patrick Posted February 7, 2012 Share Posted February 7, 2012 The part that the cable goes into on my guitar just fell apart!! It's a Les Paul 100. Does anyone know how to put those back together. The screws just fell out and it fell apart. PLEASE HELP!!!! thanks Link to comment Share on other sites More sharing options...
Thundergod Posted February 7, 2012 Share Posted February 7, 2012 Can you post a picture? If you are talking about the jack, it's not a big deal, just unscrew the 4 screws holding the jackplate in the guitar and then take the jack, put it in there and tighten it. Link to comment Share on other sites More sharing options...
Kyler Patrick Posted February 7, 2012 Author Share Posted February 7, 2012 Yeah it's the jack im havin trouble with. The thing is, it unscrewed by itself and just fell apart. When I tried putting it back together, it started getting loose again. I'll see if I can post a pic tomorrow Link to comment Share on other sites More sharing options...
D-poland Posted February 7, 2012 Share Posted February 7, 2012 Yeah it's the jack im havin trouble with. The thing is, it unscrewed by itself and just fell apart. When I tried putting it back together, it started getting loose again. I'll see if I can post a pic tomorrow had a similar problem with my DOT! I had the whole jack replaced,it messed up the threads on the jack when I tried to re-tighten it!the tech.said when I picked it up it should've had a locking washer on it!the new sw.craft jack did! problem free since then! Link to comment Share on other sites More sharing options...
pfox14 Posted February 7, 2012 Share Posted February 7, 2012 When you get it back together try a little Loc-Tite on the threads. That should hold it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.