liveForever Posted February 27, 2012 Posted February 27, 2012 is possible to replace my bridge pbbr-015 by the model pbbr-030 without making changes in the top of the guitar? That is, without making a hole or anything like that.
liveForever Posted February 28, 2012 Author Posted February 28, 2012 Can you post pics ??? this is my bridge. and this is the other
Gordy01 Posted February 28, 2012 Posted February 28, 2012 It all depends on the measurements of each bridge. There is a small amount of "forgiveness" in these bridges, but they can not be radically different. The inserts must be the same outer diameter also, or else you will have to redrill if they are bigger. Or, conversely fill the holes with maple plugs, and redrill if they are smaller. There are too many factors involved for us to make a good judgement with just your pics. You have to measure the width of the bridge first. Make sure it is the same, and go from there.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.