BDR1783 Posted March 9, 2012 Report Share Posted March 9, 2012 I just bought a epi sg s-400 and im changing out electronics in it. so far i have seymour duncan 59 for the neck and custom 5 for the bridge. i'm wanting to change the pots out and use a push pull pot and split the coils to get more options. I'm not sure what length pot I need also if any one has modded one like this im open to any help picking this stuff out. Thanks, Brandon Link to comment Share on other sites More sharing options...
AnthemBassMan Posted March 9, 2012 Report Share Posted March 9, 2012 -Usually they take short shaft pots. But it's always best to pull the old one and measure it first. L8R, Matt Link to comment Share on other sites More sharing options...
Pete B Posted March 9, 2012 Report Share Posted March 9, 2012 Mine took 10mm thread length, classed as medium http://www.axesrus.com/axeElectronicsPots.htm#MiscPots Link to comment Share on other sites More sharing options...
Texasbluezman Posted March 10, 2012 Report Share Posted March 10, 2012 I believe medium shaft in the UK is the same as short shaft in the US. Kinda funny how distributors are always trying to confuse us. When I first saw that, I thought there were 3 lengths! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.