jonnyg Posted August 26, 2012 Share Posted August 26, 2012 I came across this article about making and fitting a new nut while looking for something unrelated. Much of it I've seen before but there's an interesting technique for final polishing of the nut slots using jewellers mop and Brasso. I'd never seen that before but apologies to those who have. If you take a look you can click on the pictures to enlarge them. http://www.soundonsound.com/forum/showflat.php?Cat=&Number=766160&page=0&view=collapsed&sb=5&o=365&fpart=1#766160 Link to comment Share on other sites More sharing options...
bigneil Posted August 26, 2012 Share Posted August 26, 2012 cool, thanks Jonny Link to comment Share on other sites More sharing options...
brad1 Posted August 26, 2012 Share Posted August 26, 2012 Good stuff Jonny! Thanks for posting it. Link to comment Share on other sites More sharing options...
Elmer Posted August 27, 2012 Share Posted August 27, 2012 Very usefull, just making an ivory nut from that old billiard ball. I will pollish it properly! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.