Jump to content
Gibson Brands Forums

Replacement Saddle Screws for 60's Adjustables


Recommended Posts

If they are only tarnished, you can clean them up with a proprietary metal polish like Flitz, which is what I use for stuff like this. A bit of Flitz on an old toothbrush, followed by detailing with a bit on a small piece of rag, will usually remove even heavy oxidation. If you have one, you can then buff out on a polishing wheel, but you need to be a bit careful.


Those screws are not off-the-shelf items, as they were purpose-made.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...