Jump to content
Gibson Brands Forums

Col Mustard

All Access
  • Posts

    107
  • Joined

  • Last visited

Posts posted by Col Mustard

  1. If the guitar is brand new, my suggestion is to play the hell out of it.

    Sometimes new guitars need to "work in" a bit. I've seen many posts by players who bought

    a brand new guitar and immediately started finding problems with it. Gibson has a warranty on

    their products, check how long that warranty is, and play the hell out of this guitar for

    half that time.

    Then change the strings, re-do the setup and see where you are.

    >Also, +1 on the idea that your new Gibson might be fine, and your tuner might

    be reading slightly off.  Personally I would trust Gibson more than I would trust

    some tuners.  I have three Gibsons, and have had great experience with all of them

    so I'm no Gibson basher.

    Good luck with this, and good playing, and excellent tone for you.

     

    • Like 1
    • Thanks 1
  2. I have an Epiphone ES-339 P-90 pro, which is similar to your guitar in construction.

    All the toggle switches are similar, but it's so much hassle to get into the electronics of a "semi-hollow" guitar 

    that I recommend you try EVERYTHING else first.  Get a can of DeOxit, and spray that switch before you

    attempt to replace it.  This will likely solve your problem.


    >If it does NOT, then you'll need to decide what to do.  You could try replacing only the switch. Tie a piece of fishing line

    around your existing toggle before you unscrew it.    You'll want to have a long needle nose plier handy.  Everything has to 

    go in and out the F-hole, because of the solid center block in your guitar. Be very careful not to nick the black paint

    that Epiphone uses on the inside of the F-hole, to hide the layers of plywood they use for the guitar top, and to avoid the

    expense of binding.  Solder the new switch on in the same way the factory part was connected. Use the fishing line to

    pull it back into the hole in the top.

    >Or you could take your Epiphone to the best luthier you can find or afford, and have that person replace the entire wiring

    harness with high quality parts. I did this on my ES-339, because I figured that if one part failed, they all were suspect.

    I also decided it was worth paying a guy to do it who knows how, and spend my time playing music instead of cursing the

    makers of my guitar.  I also paid the luthier to replace everything because I am SO FOND of my Epiphone.

    >I have fallen head over heels for my Epi, and now that I've replaced dodgy parts with good quality, my guitar can take its place

    onstage alongside instruments costing eight to ten times what I paid, and not give up a thing.  I bought the ES-339 because I wanted

    that guitar and I wanted that price.  

     

    The price was low enough that I used the money I didn't spend... to buy a hard shell case and some good quality parts.  I ended up with

    a really fine instrument.
     

  3. String breakage can be caused by a number of things:

    1. Age... old dead strings will break.  Replace them often!  If you can't remember how old they are, then they are too old.

    (also, old dead strings don't stay in tune well. This is one way you know it's time to replace them.

    2. Sharp edges where they touch the guitar.  New guitars sometimes have sharp edges that will break strings.

    With use, these will round themselves off. Or the owner can use a needle file to do it.  You can feel it with your

    finger, and give it a few strokes.  Strings may stop breaking at that point.

    3. Binding in nut slots... once again, new guitars may have some edges or burrs in these crucial areas.

    Nut work is expert work, but if you are breaking strings at the nut, or if you hear the PING sound when you tune a string

    you can guess that the string is binding there.  A few strokes with a needle file, or a fisherman's hook sharpening stone

    can open it up very slightly. I usually lube my nut slots with a home made mixture of vaseline and powdered graphite. A tiny drop on a toothpick is enough for a nut slot, or a bridge saddle slot, or under the string tree on a Fender.

    Good luck, and good playing.

     

  4. I've been an SG fan since about 1963, when I saw my first one in the hands of the lead

    guitar player of some band at a party I went to.  I was about fifteen. I couldn't take my eyes

    off that guy's guitar. It was the coolest thing I'd ever seen.  There were no Les Pauls at that time,

    they had been discontinued due to lack of interest.  I probably didn't even know anything about Les Pauls

    then, because Les Paul himself was passe and. played my parents' music. The SG was a rocker, and made

    a deep impression on my young soul.
    >After playing acoustic and bass for literally decades, I finally bought myself  Gibson SG in 2008, as a gift

    to myself for turning 60. I bought an SG special with the faded finish.  That humble SG special is the best guitar

    of any kind that I have ever played. By now I've modded it with all the best of everything I could buy or make,

    not because there was anything wrong with it as built, but because I fell so head over heels for this guitar that

    I wanted nothing but the best for my baby.  Like some sugar daddy, buying pretty things for a lovely woman...

    She doesn't really need anything to be beautiful, but he loves the way she behaves when she's wearing that...
    >And it's ten years later, and she's still the Queen of my music room.  The above posts are correct, G.A.S. will 

    re-assert itself, but the SG is undiminished. One of th e world's best guitars, IMHO.  Mine weighs 6.75 pounds

    and balances perfectly.

    • Like 4
    • Upvote 3
  5. Here I will quote from an experienced friend who has shared his method on another forum.

    This method works very well, and is the opposite of what you are normally told.

    This works well enough that it ought to be made a sticky. My friend's online handle is "Biddlin."

     

    "Start in your normal tuning, ie if you play in double drop c tune your guitar to double drop c .

    Retune between each adjustment.

    Begin by setting the bridge height for frets 17-22 so that the strings play buzz free

    at the lowest possible height.

     

    Start with low E. Lower the bass side until it buzzes, raise until clear.

    Check A and D raise slightly if needed to get clean notes. Then do the treble side.

    If you bend notes up here, try a few typical bends, to make sure they don't buzz out.

     

    When all strings play clean go to the lower frets and neck relief.

    Play the high E string from fret 1 to fret 16, increasing relief (loosening trussrod)

    to relieve buzz or decreasing relief (tightening trussrod) to lower the string height.

    So tighten, by fractional turns, until it buzzes and back off until it doesn't.

    If you bend strings , do your typical bends to insure they don't buzz out.

    Once satisfied, check the other strings and make small adjustments as needed.

     

    Once you have acceptable relief, i.e. no buzz and easy action, set your intonation and you're done."

  6. Thanks for the reply, Col. Mustard, I enjoyed reading it. Since all I can afford are cheap and/or used instruments, I enjoy tinkering with them as much as I can, it helps me to bond with the instrument.

     

    But like you said, you have to have that “key” that makes investing in an instrument worth the effort. Then it becomes all yours :)

     

    I'll bet your ex-Epiphone is worth the effort. I have a step daughter who expressed an interest in playing guitar when she was

    about 11 years old. Her dad responded by buying her an Epiphone Les Paul Special ll. *grins

     

    She brought that home and was all excited.

    I responded by getting her some cool upgrades for it. I actually thought it sounded pretty good just out of the box.

    But I knew it could be better. I ended up replacing almost everything I could unscrew or unsolder. Just a labor of

    love, that's all. Grover tuners, Tusq nut, Gibson 490 pickups out of my SG, Tone Pros bridge and tail, a good quality

    wiring harness. The neck and the frets were fine. The body is made of plywood, but that doesn't have much effect

    on the instrument. Wood is like, not magnetic.

     

    The Gibson p'ups sound better in the Epiphone that they did in the Gibson. A decent nut is also a key point, as is

    the bridge. Good quality parts there make a difference, an important difference.

     

    So she ends up with a guitar that is much more than it appears to be. Great tone and sustain, it's set up very well

    and is easy to play, and stays in tune. Hard to beat. Also, it doesn't attract thieves. We kept the original "Special ll"

    decal on. So it looks like an inexpensive Epi, but it plays like a million.

     

    I'm sure yours does too.

  7. One suggestion that I have made on other fora, concerning neck shapes.

     

    Neck shapes are irrelevant if you keep your thumb behind the neck.

    I do know that many many internet posts are created by guys who feel

    that a guitar neck that is "too chunky' or "too whippy" is a crucial issue.

     

    So I'll buck all this and say that the human hand can play any instrument

    from a ukulele to a double bass with no problems.

     

    We pick our guitars based on the tone we need for the song we intend to play.

    Then we tell our hands to play the selected instrument, and we practice until

    the hand complies.

     

    Allowing your hand to tell you what guitar you will play... seems like taking

    career advice from a three year old. Never allow this. Tell your hand to

    play the guitar you need in order to make the sounds you hear in your head.

     

    This from a musician who plays acoustic, electric and bass guitars.

    I never think about neck shapes. All my instruments have different shapes.

    I just play them. And I suggest that you shop for guitars based on the tone

    you want to achieve, knowing that your hand is capable of accommodating

    your needs and wishes, to perform the music that only you can do.

  8. I don't think anyone makes fake Epiphone Les Paul Special lls...

     

    The genuine guitars don't sell for that much money, so there's no financial incentive.

     

    What you have is like a parts-caster. We can assemble Fender style guitars out of parts

    that have been bought or made or stolen, and make a playable instrument.

     

    This is true for bolt-on neck Epiphones also. And this is what you have.

    It doesn't look much like what left the Epiphone factory, but that's okay because

    it is something you have changed to meet your own needs. Or just to have some fun.

     

    Epiphones respond very well to upgrades. Inexpensive Epiphone guitars can be made into

    real players. I know this because I have done it. Repeatedly.

     

    One of my favorite instruments is a 1997 ex-Squier P-bass that was abandoned by its owner.

    The original instrument probably didn't cost more than $150 US when it was new in 1997.

    By the time it came to me, it was in bad shape... it had been down in some basement,

    under piles of debris, and the hardware was all rusty and the instrument was covered in

    mold and mildew or other life forms.

     

    I got it free, and treated it like a rescue puppy. I actually took it to a good luthier, asking

    him if he thought he could get the neck straight. I said, if he could, I'd take the instrument

    on as a project. Otherwise, it was bound for a Viking Funeral.

     

    He got the neck straight. That was the key. With a playable neck, all I needed to do was

    install good quality parts. I stripped off and threw away all the hardware, including the neck

    plate with the serial number. I bought new (good) parts: Schaller tuners, Fender nut, StewMac

    Golden Age P-bass pickup, Alpha pots, Switchcraft jack, and a Gotoh Bridge.

     

    My reward for doing the work was to end up with a very playable Precision Bass. It weighs about

    nine pounds and balances perfectly. Great tone and sustain. The neck and frets work fine, no

    problems. I have about $450 into it now, including an excellent high end gig bag for it. This bass

    can take its place alongside instruments costing ten times as much, and not give up a thing.

     

    So I would not worry about whether your Special ll is a fake. I would just mod it to suit yourself

    and play the hell out of it. What you have is a cool custom guitar that will be what you make of it.

    It likely has a low resale value... like my ex-Squier bass. So its real value is in the music it can make.

    When I had my bass stripped down, I sanded off the Squier decal. And installed a new blank neck

    plate. So my bass is no longer a Squier P-bass. It is now one of a kind, and so is your guitar.

     

    Get it set up perfectly by the best luthier you can find or afford. That's the best mod you can do to it.

    Then play it loud.

  9. sorry I repeated myself...

    I musta been dreaming about people tearing down beautiful guitars...

     

    Love this from Black Dog:

     

    "They take a perfectly good historic, take it apart completely, strip the finish, re-carve the top and neck,

    change the fretboard and put it all back together claiming it's even more historic than when it was historic ...

     

    Of course, that was for the older generation historic's which were less historic than the current historic's.

    Nothing is more historic than the current historic's.

     

    To get anything more historic now you'll need a time machine."

     

    Love it love it.

     

    And yeah, it's always the privelege of the OP or anybody else to make up their own mind

    and do as they wish. Be well, play loud...

  10. I've said this in other similar threads

    but if you bought a custom shop guitar and paid the premium price

    for it, and then you find fault with it...

     

    What I think you should do is sell that guitar unmodified to someone

    who values it more than you do. Don't mod it, sell it, and use the money

    to buy what you really want.

     

    There is no reason for any Gibson guitar pickups to sound 'too bright"

    or 'too muddy" or what. Gibson pickups are accurate. The tone achieved

    by the player is a combination of many factors, beginning with the pick he

    selects, (or his bare fingers) and continuing through all the magnetics and

    electronics and output through the speakers he chose to install in the amp

    he chose to play.

     

    If you can't figure out how to find your tone with a Gibson Custom shop guitar,

    then I recommend you sell that immediately to someone who can. Then use

    the money to go on your quest. Go where they sell them...Play as many as they'll

    let you. Buy the one that comes alive in your hands. That's the only way to find

    the right guitar. Because with Gibsons, it doesn't matter if it's a custom shop

    guitar or an SG faded special... One will be a clunker, and one will be gold.

     

    And there's really no way to know, until you play it. Play a lot of them, and one will

    emerge as THE ONE. It might surprise you, and be of much more humble origins.

    But still a Gibson. It really doesn't matter if a guitar was made in the custom shop,

    if it doesn't come alive in your hands when you play it.

     

    Players like me regard the Custom Shop as a con game.

    All Gibsons are excellent. Custom Shop makes instruments for guys that can afford to

    pay extra for the same thing the rest of us already have. *shrugs

    You don't have to believe me. Just go on the personal quest that I recommend, and make

    up your own mind.

     

    But before you do, unload the Custom Shop guitar that doesn't please you.

    Unload it without devaluing it by ill considered modifications. Somewhere there is a player who

    would respect that instrument much more than you do. Find that person, and get their money,

    and turn over the Gibson, and let it all go. Then begin your quest in person. I predict that you'll

    have a lot of fun in the search, and you'll end up with something that makes your music

    soar like an eagle.

  11. well and so...

     

    I've seen plenty of this debate over on another forum known as ETSG

    which of course represents Everything SG...

     

    I am old enough to remember sweaty nights in dicey venues, when the

    guitars were cranky and would not stay in tune... Humidity, stuffy heat, bitter cold,

    grease in the air from the kitchens, Tobacco smoke and girl perfume...

    whatever factors were at work would sometimes sabotage even the most meticulous

    of professionals. (I was NEVER that).

     

    In those primitive days, we were using tuning forks, harmonicas, even

    dodgy honky-tonk pianos to tune our guitars. No electronic tuners (except

    the fancy strobes used in recording studios), no internet, no stomp tuners,

    no clip-ons... no cell phones with the Gibson app... just the human ear.

     

    The human ear has good days and bad days. Mine do anyway.

    So I remember raising my voice in frustration, and swearing that who so ever

    would invent a servo to mount behind the headstock of any guitar and keep said

    guitar in tune would become very rich.

     

    Now we all know it ain't that simple...

    Many thanks to the OP for a great write-up, and for all that meticulous dis-assembly

    and analysis. That, sir was well done, and maybe should be made into a sticky on this

    site, since this topic is sure to be revived again and again.

     

    In spite of my frustration in the '70s, I don't own a robot tuner mechanism. I am happy

    with the stomp tuners I have on my boards, and with the clip-ons I use any other time.

    So I have watched the whole debate with detachment of one who is truly uninvolved.

    I too can tune my own guitar. And I can go from one tuning to another... although my guitars

    often become cranky when asked to submit to this.

     

    My solution as a practical musician is to bring two guitars to any gig (as well as my bass

    since I'm a switch hitter). I will tune one to something I intend to use in a particular set,

    and then change it and let it sulk for a bit before asking it to perform in a different mode.

    I use good quality standard tuners... coupled with stomp tuners and clip-ons. And this works.

     

    So I don't need the Tronical invention any more. In spite of how cool it seems... to be able to

    save DADGAD as a preset, along with DADF#AD and its sister DADF#CD and their cousin

    EBEAbBE... those features are VERY attractive to someone like me, who actually can use three

    of those tunings in one set.

     

    My problem with techno marvels, as a working musician... is DEPENDABILITY...

    I have learned the hard way never to trust techno marvels when a performance, and maybe my

    career are on the line. Keep it simple. Keep it analog. You can buy guitars with push-pull

    knobs enabling the guitarist to emulate several different instruments (badly), and you can

    buy amps that enable the guitarist to emulate many different rigs (approximately) by "modeling"

    but I have learned (the hard way) that the best tone is the simplest.

     

    Not everyone will agree of course. Anyway, I found all of this thread interesting, and I still maintain

    an open mind on this topic, even though I don't own any of the technology and have refrained from

    investing in it. For me it's easier and more effective to buy another guitar. This actually works!

     

    But I can still see how useful this technology might be to the overworked and underpaid guitarist

    who needs to be able to play multiple styles in one night, and who needs logistics to be as

    simple as possible... instead of what I was saying. If you go to the gig on the subway, with a guitar

    in one hand and a very cool amp in the other, then versatility is the key, and the tronical technology

    might help you a lot. ...as long as it works. Multiple guitars not an option? Use this tronical robot

    Les Paul, and bring home the bacon.

    • Like 1
  12. wow, I think it's bizarre that this issue is still going.

     

    I first heard about this in the eighties. And in those days

    you really could not trust the makers of the typical guitar stands

    that were available to us.

     

    We bought the darn things, because that's what was in the music

    store. The store owner probably didn't have a clue that ingredients in

    the plastic would still be active and would eat into the finish of their

    clients' expensive lacquer coated guitars.

     

    I certainly didn't have a clue. When I heard about it, I threw away

    all my old dorky guitar stands. I hated them all anyway. I bought

    new ones from a very reputable guitar store, and bought better quality

    than I had bought before. Two of my stands were good, so I sliced off the

    plastic junk and bought fuel line tubing from the auto parts store. I soaped

    up the metal, and slid the fuel line tubing onto the stands I liked, and have

    had no trouble since. Fuel line tubing seems to be stable. *grins

     

    I believe that manufacturers have all heard

    about this issue, and by now they should have all solved this chemical

    issue. should have... should have... should have...

     

    Lucky me, I've never had this problem. I use snark tuners also, and have never had

    any of those damage a guitar of mine. My guitars are made by Gibson, and Martin,

    and Fender, and Epiphone, and I have one I built myself and finished with tung oil.

    Most of them are lacquer... although MIM Fenders and Epis are finished in Polyurethane.

     

    Polyurethane is impervious to anything but hammer blows and bullet hits.... or

    maybe cigarette burns.

  13. I'll add something here that no one else has said:

     

    If you want a Les Paul for a mod platform, don't buy a Historic.

    Buy something less expensive, and less specialized, and turn it into

    exactly what you want. Then rock that sucker.

     

    If a Historic isn't exactly what you want, don't mod it... Sell it unmodded

    to someone who values it more than you do. Then use the money to buy

    or create exactly what you want.

     

    You'll get more money for your Historic if you sell it unmodded. A lot more

    IMHO.

     

    In addition to that, I don't think there's any reason that a set of burst bucker

    pickups should sound too bright. If they do, I would look somewhere else in

    your signal chain for the reason. What burst buckers are is accurate.

    They produce highs, mids and lows. They are one of the best pickup sets

    Gibson makes, (in spite of what some guys say) and you ought to be able to

    get great jazz tones, great classic rock tones, great cleans in all frequencies

    and great output for overdriving tube amps.

     

    If you can't, I'd look at your signal chain critically, with the assumption that

    there's nothing wrong with your guitar or your pickups. You could verify this

    by simply asking an experienced guitarist to plug your Lester into his own

    rig, and play it for you. Watch what he does as he finds his tone. If he can't

    find his tone either, then maybe the p'ups or something else is at fault.

    Listen while he tries to figure it out.

     

    It's a good way to know what to do next.

    • Upvote 1
  14. I think I found my holy grail guitar today. Backstory: I’ve been a working musician for 30+ years but I’ve recently had some success with tech videos on YouTube. I promised myself I would buy myself a great guitar if I ever made real money with my creative stuff. Well, as of today, I did.

    I’d been shopping around for a while, thinking about a Martin d-18 or d-28 or a J-45. I couldn’t find anything I really loved but this morning I was looking through the mail and saw the Gibson had released a GC exclusive J-45 Walnut just yesterday. I looked online and my store had it in stock so I went to check it out.

    No one know what I was talking about, so I had to explain 3 times before they found it in the back, still in it’s shipping box. I was the first to play the thing. Looks great, smells great, plays amazing. I walked out an hour later with the guitar and I’m still pinching myself. I didn’t think I’d like the honey burst finish but it looks a lot better in person.

    As I was checking out the manager told me that this guitar was a limited edition to the point that that GC would not be getting another one. It’s a beautiful, special guitar but not so fancy that I feel like it isn’t a J-45. I couldn’t be happier, until the sticker shock sinks in.

     

    Congratulations, excellent choice. I recently bought a 2018 J-45 AG and love everything about it.

    Mine's got a plain spruce top, and is more ordinary looking. Yours really stands out as the

    unique instrument that it is.

  15. The way I interpret the OP's question is to ask if there's a difference between a Chinese made Epi 335 dot and a Chinese made Epi 335 pro...

     

    The answer is likely: not much. Epiphone guitars are made as replicas of Gibson guitars, and there is a cult of worship around the vintage Gibson ES-335 Dot.

    That's the only reason Epi makes one. It's a replica of a highly regarded (and highly priced) vintage Gibson guitar. But it bears only superficial resemblance

    to the original.

     

    The Epi ES-335 Pro will include the Alnico pro pickups, and a set of coil splitting volume pots (which the Gibson ES-335 never had)

    The fingerboard features 'fret-over" binding, which IMHO is highly superior to Gibson's traditional binding with the dawg-gone 'nibs."

    I own two Epiphone guitars: a Wilshire and an ES-339 P-90 pro. Both feature this 'fret-over' binding and I like it right well.

    I agree that it's a totally unnecessary bangle, and my other guitars with unbound necks have NO problems. No binding, no nibs, no problem.

    But the humble Epiphones with their nicely bound necks have an elegance to them that we don't expect in an inexpensive guitar.

     

    The Epi ES-339 Dot has no binding, and no inlays except the dots, and a different Epiphone Humbucker pickup, and a lower price tag.

    The Epiphone bears little to no resemblance to the revered Gibson ES-335 Dot except in looks from a distance. This guitar is not expensive

    compared to what... so it would be a great mod platform. I believe that the Dot and the ES-335 pro would sound much the same except

    for the coil splitting, which is a pointless feature IMHO. If I want a single coil sound, I'll play my ES-339 P-90 pro.

     

    So, IMHO... you go where they sell them, and play as many as they'll let you. Then pick the one that sounds and feels the best. Or the one

    that is on sale. Mod it to your liking, and play the hell out of it. That's what I've done with my Epiphones.

  16. Hello All,

     

    I picked up a Wildkat in a trade. I love the look and of course the Bigsby. Unfortunately, I can't seem to get more than 3 or 4 songs before it needs to be tuned. It is pretty frustrating. So my question is does anyone have tips to improve the tuning stability.

     

    Thanks for reading my post!

     

    I have a few suggestions:

    First: New strings... Old dead strings will not stay in tune. I've seen many posts where people talk about tuning issues, and suggest all kinds of expensive

    surgery without mentioning this little fact. How old are the strings? Guitar strings are a cheap "when in doubt, change them" remedy to try first.

    Two weeks to a month is all you can expect to get with a set of strings. After that, they go dead and won't stay in tune, and it's no fault of your guitar.

     

    (also, IMHO three or four songs is about all I ever get... on any guitar. I usually tune my guitar before every song. It depends on how hard

    you hit it of course, and how sensitive your ear is. That's why I like pedal tuners and clip ons. I just tune my guitar before every song

    without even thinking about it.)

     

    Next: +1 on lubing the nut slots, bridge saddles and bigsby contact points. I use a home made mixture of vaseline and powdered graphite.

    A tiny dot on a toothpick is enough for a nut slot, or a bridge saddle, or under the string tree on a Fender. StewMac sells some stuff called

    "Guitar Grease" which works well and isn't as expensive as Nut Sauce.

     

    >The nut is usually the source of tuning problems as described above. The nut slots need to be the exact dimension of the strings you prefer.

    That's one of the things a pro setup includes and is very worth the money you spend on it. A good luthier has tools that can measure nut slot

    depth and dimension. The average player does not. So it's always a good idea. After a pro setup, most players can maintain their instrument for

    a good long time. I have installed Tusq nuts on both of my Epiphones, and they are much better than the stock plastic. These are slick and don't

    need lube, only slight adjustment.

     

    >All players should learn and use what I laughingly call "The Poor Man's locking tuner." Check this "self locking" method of installing strings

    and see if it doesn't help your situation, so that you don't have to buy a new bridge or new tuners.

    http://www.google.com/search?client=safari&rls=en&q=installing+guitar+strings+%2B+self+locking+method&ie=UTF-8&oe=UTF-8

  17. I bought one of the 2012 Gibson SG special '70s Tribute guitars in like May 2013... this was the first issue.

    Mine has a maple neck, baked maple fretboard, volute, oversize Norlin style headstock, new design Mini Humbuckers

    Block inlays, TonePros tuners, corian nut, 500k pots and a Silverburst finish. I don't think the 'tribute' models are intended to be

    a replica of any vintage guitars, but were intended to correct the flaws of the earlier instruments while keeping

    (if possible) the cool factor and the mojo.

     

    There was a lot of negativity about the baked maple fretboards in 2012-13, but it was all just closed minded

    hoo-hah. The baked maple is an excellent material, and I've had no problems with mine. The fretboard was a lovely

    reddish brown when new, but I put some fret doctor on mine and it darkened up nicely. Smooth, hard and fast.

    I really like this guitar.

     

    The mini humbuckers are similar (if not identical) to those used in the Firebird. No pole pieces, these new ones have

    blades under the covers instead. I believe (but don't know) that the Mini Humbuckers used on the Les Paul Deluxe

    are somewhat different. Those have pole pieces and holes in the covers. I don't know if there are big differences between

    the types of mini... You'd think Gibson would design and produce but one type, and install that where logical.

    All I know is that I sure like the tones I get from mine. Great growl in the lows, strong mids with a lot of presence

    and jangly sparkly highs with no ice pick.

     

    The model I bought did not sell well, maybe due to too much negativity and to the fact that this instrument has a unique voice all

    its own. That's why I wanted one. (that and the block inlays and Silverburst *grins) Sometimes guitarists can be very closed minded.

    I think that players just didn't know what to make of this model, and they stood back and scoffed. A closed mind is nothing to

    be proud of. I didn't care what anybody said, I just wanted one. The price was too high, so I stood back too.

     

    But M/F marked them down, and then down again, and then down again until I couldn't stand it. I might have got one of the

    last ones, and I'm so glad I did. These are great guitars. IMHO anybody who thinks a new guitar should be perfect right out of

    the box is dreaming. All of them need setup, and the sooner the better. You should just expect it, and then get it done and

    move on. Who knows how long it was sitting in a warehouse before it shipped to you.

     

    That said, Sweetwater is supposed to be one of the best places to get a guitar online because they are supposed to correct any

    problems before it gets shipped. If they fail to do this, I believe their customer service is good. I've had only excellent experience

    getting gear from them.

     

    Anyway, imagine my surprise when Gibson re-issued this model for 2016! It's got a regular rosewood fretboard but all the other cool

    features, and some new finishes, and it's only $739. Mine came with a 'Satin' finish... which was cool. But I bought some Meguiar's

    Ultimate Compound from an auto parts store and hand buffed my satin finish until my arms were really tired. Then I decided it

    was shiny enough. It looks great now. I named her April. That's her in my avatar.

×
×
  • Create New...