simont Posted December 23, 2008 Posted December 23, 2008 these pages changed today http://www.tronical.com/products/dark-fire.htm
simont Posted December 23, 2008 Author Posted December 23, 2008 I swear my heart jumped when I saw the link "Gibson Dark Fire Downloads". Alas it is a link to existing info. PT 2 has 14 internal switches to activate/deactivate components according to the selected operating mode. In this way we spend just the energy for the essential components. Would they be hardware or software switches I wonder. Could this mean there is the possiblity of us having the the PIEZO Out "operational while charging" in the future?
ScottiesInBoca Posted December 23, 2008 Posted December 23, 2008 Glad to see this thread. I was going batty trying to figure out why I was not getting any output from the Acoustic output no matter what setting I used - even though I was using their stereo cable from the guitar to the "charger." It worked through a MONO output direct to the amp, but not when I tried following the instructions for a split acoustic / electric sound. There really needs to be a manual. Scottie
elantric Posted December 23, 2008 Posted December 23, 2008 Remove the "wal wart charger" from the black splitter box - and then try the Acoustic Out jack - it will work.
simont Posted December 30, 2008 Author Posted December 30, 2008 DARK FIRE OWNER’S MANUAL (version 122908) Page 10 ...... The independent Piezo Out is not available for use during charging, because the charging is being conducted on the sleeve of the stereo plug. If you are using Piezo signal, it will be blended in mono with your regular pickup output at the tip of the plug, and it will also pass through the Amp output. Thats good news for us live Piezo users :)/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.