SoulFire Posted October 3, 2015 Share Posted October 3, 2015 Hello: I have the Epi Slash Rosso Corsa and it is not functioning properly in the middle position. It works fine in the neck and bridge position. When I switch to the middle position, it is the same as the neck position. In other words, only the neck pickup is working. I have no bridge pickup sound at all. All of the wiring seems to be fine (both at the switch and at the pots). Where is the best place to start looking for the problem? Do I need a new three-way switch? Seems like that would be the problem. Any help is greatly appreciated. Thanks. Link to comment Share on other sites More sharing options...
deeman Posted October 4, 2015 Share Posted October 4, 2015 I would check both volume knobs, if one volume is all the way down, then you won't hear anything in the middle position. If that isn't the problem, try cleaning up the switcher, make sure there is good contact in the middle selection. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.