RIP Question

[icing777]

Guys,

If I power up the RIP, connect it to PC, plug in my SG (not DF) into RIP's guitar input on the front panel of RIP, plug in headsets - I should be able to hear the guitar thu headsets, no?

Ain't happenin.....

 

BTW, on the RIP Panel - the channel is muted when the "Mute" button is yellow or grey?

 

I actually tried both ways, all sliders are up all the way and no sound.....

[elantric]

Using a standard guitar - On the RIP console you should see VU activity only on the far left MAG PU channel

 

You must pan and raise the far left vertical slider+ master sliders and umute.

[icing777]

Steve, i see the activity, all sliders are up, paned left/right/center, clicked mute to be yellow and grey (which one is actually mute?) - no sound....

[elantric]

http://media.gibson.com/DarkFire/Manuals/1_1/Gibson_Quick_Start_Manual_Applications.pdf

 

see page 8

1. Unmute the Guitar channel (Mute switch label goes from yellow to white).

2. Make sure Gang is lit green on the Analog Out 1 and Out 2 channels.

3. Turn up the Analog Out 1 and 2 faders to a comfortable listening level.

[icing777]

Got it! I had to activate speakers thru the Control Panel / Audio.

Mute should be grey to make sound.

 

Now, what does this set up (RIP only ) give me besides being able to practive thru headfones?

Any other use?

[elantric]

Any other use?

 

generate $$ and sell it me

[icing777]

LOL!