wiggy Posted June 13, 2010 Share Posted June 13, 2010 I've posted this over on the mylespaul forum and I thought I'd post it here as well to get your suggestions as well. Having got myself a pedal board at last I set out to load it with my pedals - simple job I thought, just stick the supplied velcro to the bottom of each pedal and away we go. Worked fine for those pedals with a flat base but how does everyone get around the problem of those pedals which have small rubber feet or, as in the case of my Crybaby, large rubber feet with screw holes in them. There's not enough surface area for the self adhesive velcro tape to stick to with any degree of success but too much height on the feet to stick the tape to the flat base in between. Link to comment Share on other sites More sharing options...
snookelputz Posted June 13, 2010 Share Posted June 13, 2010 Remove the feet, put them in a small plastic bag, seal the bag and velcro it to the inside of the pedal board lid. At least, that's what I did. Link to comment Share on other sites More sharing options...
wiggy Posted June 13, 2010 Author Share Posted June 13, 2010 #-o Talk about missing the obvious Never even occured to me to do that feel like a total prat now!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.