1998StandardSG Posted May 24, 2012 Share Posted May 24, 2012 In the event your GCB-95 push button breaks you can use another three post push button to get it working again. I used a switch from an unused channel selector foot pedal. ______ And here is how I wired it to get it to work properly. | | | | |______| || || || 1 2 3 1. Green Wire 2. Purple Wire 3. Dark & Light Blue Wires So if you are in a jam and don't feel like special ordering a Carling switch from Dunlop just go to an electronics store and find yourself a push button switch that has a long enough shaft or rip it from something you don't use. Or get yourself a DPDT push button and convert it to true bypass! Just need to remove some resistors to get this to work. Link to comment Share on other sites More sharing options...
1998StandardSG Posted May 24, 2012 Author Share Posted May 24, 2012 Hmm the forum messed up my button diagram! haha OK visualize a box with three metal posts coming out of it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.