Light767 Posted June 1, 2018 Share Posted June 1, 2018 Hi there I have a 57 classic and a 57 classic plus pick ups reverse zebra, 2 wires. I'm trying to MOD them to make them 4 wire conductors. I have removed the tape (which sadly is the PVC type and not the cloth type) and I have seen that the wire inside are all black and not colored as usual. What can I do? Link to comment Share on other sites More sharing options...
Light767 Posted June 2, 2018 Author Share Posted June 2, 2018 Hi there I have a 57 classic and a 57 classic plus pick ups reverse zebra, 2 wires. I'm trying to MOD them to make them 4 wire conductors. I have removed the tape (which sadly is the PVC type and not the cloth type) and I have seen that the wire inside are all black and not colored as usual. What can I do? here there is a picture As you can see all the wire are black so I don't know how to distinguish a wire from the other because on the internet it's full of guide based on the color of wires. Link to comment Share on other sites More sharing options...
Light767 Posted June 2, 2018 Author Share Posted June 2, 2018 here there is a picture As you can see all the wire are black so I don't know how to distinguish a wire from the other because on the internet it's full of guide based on the color of wires. Hi This is my situation better explained Link to comment Share on other sites More sharing options...
Johnny 6 String Posted June 4, 2018 Share Posted June 4, 2018 Hi This is my situation better explained Hi Light; Looks to me like someone has already been at that pickup and soldered some of the wires incorrectly. Also, your ground wire (braid around the external wire) has been chopped back so far as to be unusable. The "what is this" wire should not be soldered to the external wire, but prob to the wire that is currently soldered to the external wire. That is assuming that the other internal wires are hooked correctly (N/S or start/finish). Anyway, you were originally asking about 4 wire pickups, well there are the four wires. These will need to be extended out to give you coil split or series/parallel wiring (also the ground which is chopped back). Hope that helps Johnny Link to comment Share on other sites More sharing options...
Light767 Posted June 28, 2018 Author Share Posted June 28, 2018 Hi Light; Looks to me like someone has already been at that pickup and soldered some of the wires incorrectly. Also, your ground wire (braid around the external wire) has been chopped back so far as to be unusable. The "what is this" wire should not be soldered to the external wire, but prob to the wire that is currently soldered to the external wire. That is assuming that the other internal wires are hooked correctly (N/S or start/finish). Anyway, you were originally asking about 4 wire pickups, well there are the four wires. These will need to be extended out to give you coil split or series/parallel wiring (also the ground which is chopped back). Hope that helps Johnny I manage to made the MOD at the end, the wire that you see in the picture and that I didn't know what it was, it's actually the wire that is solder to the bobbin wound. I have had to repair it because it was desoldered. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.