vaarl Posted June 21, 2013 Share Posted June 21, 2013 Hi guys and gals, I wanted to change my stock knobs for witch hats and found they don't fit, too small/tight, I want to buy some top hats/silver instead now but am worried these won't fit, can anyone tell me exactly which size to buy for a les paul special humbucker model? Thanks in advance M. Link to comment Share on other sites More sharing options...
btoth76 Posted June 21, 2013 Share Posted June 21, 2013 Hello Vaarl! The sleeve diameter of the knob should be 6 milli-metres. Cheers... Bence Link to comment Share on other sites More sharing options...
vaarl Posted June 21, 2013 Author Share Posted June 21, 2013 Cheers Bence, it is a mine field of mis/info out there 5.9mm / 6.4mm 6.0mm I suppose I could just buy Gibson ones and expect them to fit? Link to comment Share on other sites More sharing options...
btoth76 Posted June 21, 2013 Share Posted June 21, 2013 Yes, I guess so. With OEM parts You can't go wrong. Cheers... Bence Link to comment Share on other sites More sharing options...
btoth76 Posted June 21, 2013 Share Posted June 21, 2013 Hello again! If You roll down this page approximately to 4/5th of the way, You'll find "Witch-hat" knobs that are suppossed to fit split-shaft pots: http://www.grguitars.com/parts_5gibson.htm Cheers... Bence Link to comment Share on other sites More sharing options...
vaarl Posted June 23, 2013 Author Share Posted June 23, 2013 Thanks for that, I'm in the UK so will look into it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.