20_Gauge Posted January 27, 2014 Share Posted January 27, 2014 I'm wanting to remove the stock tuners on my EJ-200 Artist & replace them with the Grover Vintage Deluxe Keystones I got today. Can anybody give me advice or a link to a good how-to video(I saw 1 on YouTube earlier but can't find it now)? If it's possible I'd like to do it myself rather than pay a luthier to drill 2 li'l holes(per tuner). 20 Link to comment Share on other sites More sharing options...
Kurt Vonnegut Fan Posted January 29, 2014 Share Posted January 29, 2014 Properly locate holes. Indent with an awl. Using the proper size bit (diameter of the SHAFT of the screw) in a Dremel with tape or something on the bit to mark the depth, which should be just shy of the screw depth so you don't drill through the headstock. easy peasy Link to comment Share on other sites More sharing options...
20_Gauge Posted January 29, 2014 Author Share Posted January 29, 2014 Properly locate holes. Indent with an awl. Using the proper size bit (diameter of the SHAFT of the screw) in a Dremel with tape or something on the bit to mark the depth, which should be just shy of the screw depth so you don't drill through the headstock. easy peasy Thanks Kurt. Yeah I watched some vids on this & it does seem easy but the curve like shape of th Epi Acoustic headstocks have me leary about getting'em lined up. 20 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.