MarioC Posted February 3, 2014 Share Posted February 3, 2014 Updating the push/pull pots on my Swingster. I have the WD500PP-US on the way from www.guitarpartsresource.com and I already have the wire for the harness. What I can not find is what the voltage values are for the capacitors there are several volt variations out there for a .02 uF 2A2322 The capacitors and those are all the numbers I could find on them. They are disc and I searched the web for a couple of hours and could not decode the 2A223 on any of the sights. From what I understand they can be replaced with a .022 but once again the voltage vale is not mentioned and I would like to keep the capacitors to OEM specs if possible. Would someone have any knowledge of what the volt value is for the capacitor on the Swingster? I appreciate the help folks I have learned a lot from this Forum. Blessings Link to comment Share on other sites More sharing options...
vomer Posted February 4, 2014 Share Posted February 4, 2014 It doesn't matter. Guitars produce teeny tiny voltages and any cap will be capable of handling them. A popular cap for Epi upgrades is the Sprague Orange Drop. Link to comment Share on other sites More sharing options...
MarioC Posted February 4, 2014 Author Share Posted February 4, 2014 Updating the push/pull pots on my Swingster. I have the WD500PP-US on the way from www.guitarpartsresource.com and I already have the wire for the harness. What I can not find is what the voltage values are for the capacitors there are several volt variations out there for a .02 uF 2A2322 The capacitors and those are all the numbers I could find on them. They are disc and I searched the web for a couple of hours and could not decode the 2A223 on any of the sights. From what I understand they can be replaced with a .022 but once again the voltage vale is not mentioned and I would like to keep the capacitors to OEM specs if possible. Would someone have any knowledge of what the volt value is for the capacitor on the Swingster? I appreciate the help folks I have learned a lot from this Forum. Blessings I will just go with the 100 or 200 volt then and see what happens. Thanks for the help I appreciate it. Blessings Link to comment Share on other sites More sharing options...
MarioC Posted April 2, 2014 Author Share Posted April 2, 2014 I will just go with the 100 or 200 volt then and see what happens. Thanks for the help I appreciate it. Blessings I apologize for taking so long to get back with the results old man old memory. Well it was a 200 volt ceramic disk capacitor and it worked fine. The new wiring harness was built and installed and I am very happy with it. The tone has actually improved and the pots are great. I have a problem with the G string saddle on the roller bridge buzzing when I get that taken care of it will be one great Swingster. Link to comment Share on other sites More sharing options...
vomer Posted April 2, 2014 Share Posted April 2, 2014 Glad to hear you got that sorted. I've never had or worked on a roller bridge, there might be someone else here who can help with that. Link to comment Share on other sites More sharing options...
MarioC Posted July 25, 2014 Author Share Posted July 25, 2014 Glad to hear you got that sorted. I've never had or worked on a roller bridge, there might be someone else here who can help with that. I finally got around to fooling with string and found that this stopped the rattle. I got the bridge noise stopped by going to 11=52 with a wound G string. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.