Kaiser Bill Posted May 2, 2016 Share Posted May 2, 2016 Greetings fellow Eppy owners. I've had my Joe Pass about 9 years, and I can't keep a selector switch in it. Its a Korean made guitar, but I've replaced the switch twice now with upgraded (Stew Mac) parts. I just put a new switch in it...wired it EXACTLY like it was, and I have the neck pup and the combo of the neck and bridge pup. HOWEVER the bridge pup by itself does NOTHING. I'm open for any ideas or cures to this problem. Thanks for all your help in advance. I'm about at my wits end. Link to comment Share on other sites More sharing options...
Guitarsnharleys Posted May 10, 2016 Share Posted May 10, 2016 My guess is bad luck, bad switch, or bad solder joint. I'm having a similar issue after installing a JP "drop in" harness, but I have neck and bridge independently, but only bridge in middle position. Can't check the connections on the pots because they're coated with blue plastic. Gonna try a jumper on the switch later to see what that does. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.