Reptile Smile Posted March 18, 2017 Share Posted March 18, 2017 I bought some after market pup rings from Vanson, but the hole spacing is too small, and they bow/buckle in the middle when screwed down - the screws have to go in at an angle? I'd assumed everything was just standard sizing but apparently not. I just want to change them back to black. Does anyone have any suggestions? Thanks Link to comment Share on other sites More sharing options...
L5Larry Posted March 18, 2017 Share Posted March 18, 2017 Gibson branded pickup rings are readily available from many retailers. Here's an example: http://www.ebay.com/itm/Gibson-Les-Paul-Rings-Humbucker-Black-Pickup-Mounting-Guitar-Parts-SG-V-HP-ES-R9-/322436688474?hash=item4b12b96a5a:g:tFsAAOSwo4pYmfZK Link to comment Share on other sites More sharing options...
Reptile Smile Posted March 18, 2017 Author Share Posted March 18, 2017 Turns out the ones I had were Epiphone spacing and Gibson is different. Worse, in the UK it's really hard to get hold of the Gibson ones (have no idea why...) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.