Are Posted May 31, 2022 Share Posted May 31, 2022 (edited) Whenever i bend over, preferably to adjust some knob of one of my pedals, the trem arm usually falles out. There must be some way to prevent this? Edited May 31, 2022 by Are Quote Link to comment Share on other sites More sharing options...
r2bflash Posted May 31, 2022 Share Posted May 31, 2022 You must be talking about an R-trem? Hex screws next to the hole tightens the grip on the trem arm. Quote Link to comment Share on other sites More sharing options...
Be.eM Posted June 1, 2022 Share Posted June 1, 2022 As @r2bflash said, tighten this screw to clamp the arm: Quote Link to comment Share on other sites More sharing options...
krumi Posted December 6, 2022 Share Posted December 6, 2022 I‘m looking for a replacement arm for the R-Trem, but original spare parts seem hard to find. There are multiple offers, but they are pretty different. Is the arm 6 mm in diameter and got a groove? Quote Link to comment Share on other sites More sharing options...
Be.eM Posted December 6, 2022 Share Posted December 6, 2022 4 hours ago, krumi said: I‘m looking for a replacement arm for the R-Trem, but original spare parts seem hard to find. There are multiple offers, but they are pretty different. Is the arm 6 mm in diameter and got a groove? Krumi, 6 mm is correct, but there are two different kinds of R-Trem arms. The "standard" version as used on all R-Trems since about 1990 is straight, without any groove or thread. Some very early R-Trems used on Hohner headless guitars need a groove on the arm. See here: If you're looking for the later standard version, I've got these available: Bernd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.