eallenb Posted August 5, 2010 Share Posted August 5, 2010 First time at a do it yourself install. I bought the pick up and pick guard from a place Milo suggested. Then did the Lay Out work,installed the electronics i.e. pots, wiring etc. countersunk the screw holes WAH LAH or maybe TA DAH Pluged it in and then listened to it SING. JAZZ, There just ain't enough eeeeeeeeees' in SWEET to describe it! http://i796.photobucket.com/albums/yy245/eallenb/th_L7Gibson002.jpg' alt='th_L7Gibson002.jpg'> [/img] Link to comment Share on other sites More sharing options...
Blackie Posted August 5, 2010 Share Posted August 5, 2010 ooooooo cool.......I missed the knobs at first look. Link to comment Share on other sites More sharing options...
Riffster Posted August 5, 2010 Share Posted August 5, 2010 Can't tell, is the pickup one of those that clips on to the fingerboard? Link to comment Share on other sites More sharing options...
eallenb Posted August 6, 2010 Author Share Posted August 6, 2010 Can't tell, is the pickup one of those that clips on to the fingerboard? Actually the pickup attaches to the Pick-guard. You probably can not see that from the pictures I sent but, there are 2 countersunk holes in the guard that the pick up attaches to. This all came as a kit without a template so it had to be a custom fit for all the components. If you notice the 1/4" jack is at the bottom edge of the guard mounted between the volume and tone controls. I did this because I did not want to drill into the L7 Body. I used nylon threaded bolts instead of the nickel bolts usually associated with this type of set up so that I could paint them black to blend in with the guard itself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.