brianh Posted March 21, 2009 Share Posted March 21, 2009 Anyone know how to remove the DSP circuit from the signal path on a Valve Special? I've heard it makes a big difference, but can't find any how-to about it. Thanks, Link to comment Share on other sites More sharing options...
zatoichi Posted March 25, 2009 Share Posted March 25, 2009 The problem is, there are (apparently) several ways to do it. Not so bad, 'tl you realise that the only way to know which one you like best is to do all of them (ummm, no) - and even then you'll learn more about which schematic you should have used. Welcome to the quandary! Link to comment Share on other sites More sharing options...
brianh Posted March 25, 2009 Author Share Posted March 25, 2009 Thanks Z, five days on the forum and you're the first to respond. Any ideas how I can find info on one or more of the mods? Cheers, Link to comment Share on other sites More sharing options...
ladyscaglyc Posted March 25, 2009 Share Posted March 25, 2009 You'll have to go through the archives here (earlier posts) , There were great directions given to me by a few of the real "mod" people. I traded my Standard before I "opened the chassis" though. The bypass was relatively simple, but I did not have the funds to get an outboard reverb at the time. My request was to get more Fender "sparkle". Their suggestions & directions would have done that, too. Boy do I miss the look, size & power of that amp, but not that DSP. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.