Jump to content
Gibson Brands Forums

Single ABR-1 saddle replacments available?


Toner

Recommended Posts

Yes. I've had to rebuild two ABR's over the years (including re-arching one of them). I got the saddles from a vintage guitar dealer.

 

Although probably not available over the counter at GC, any good tech should be able to hook you up. The worst case senario is that you have to buy a new ABR and rob the saddles off of it.

Link to comment
Share on other sites

I was wondering if there are any single nickel plated brass ABR-1 saddles available from Gibson' date=' or aftermarket somewhere?[/quote']

Here ya go, just what ya need, I don't believe the replacement saddle is chrome for the ABR-1 it probably a mis print, should be polished nickel plated brass. http://www.gibson.com/en%2Dus/Divisions/Gibson%20Gear/Accessories/Replacement%20Parts/Bridges%20%5Famp%3B%20Tailpieces/

Link to comment
Share on other sites

This is the only place I have found that sells nickel saddles for ABR-1 http://home.insightbb.com/~blackriderguitars/parts.html#newparts

Highlite this intire url address and copy and paste it, I don't know why the whole thing will not highlite as a web address. Only half of it is highlited. You could call or email them and ask if they will sell just one. They list them as a set of six for $20.00. You might have to buy a new bridge and use one of the saddles from it and keep the pother for spares.

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...