gimox Posted January 21, 2012 Posted January 21, 2012 Hi i need helpo aboiut the trus-rod in my zt3. the guitar has very bad setting when i buy it. After 2 month i decided to set action and truss-rod. No problem to set tran-trem, action and other but when i take a look at the nek i can see that it's not right. The truss-rod need to be set. my guitar has a strange sound inside the neck like a slaming screw. I get the torx to regulate it and i can see that the truss-road screw is unscrew. ok no problem i screw the truss road slowly. the truss-road screw may appear screw and it appear little hard. Ok it work but i but i need the opposite correction, if i screw the nek is not crrectly set, the string are too near at 5/8 key. But if i unscrew the nek return in line and after a screw of the truss road come out in my hand!!!!!! SO it work if i screw but it not work in the opposite !!!!. The trans trem action is hight, i need some help about truss-rod!!! It's broken? there are an other way to regulate the cybrosonic? Is normale, if i unscrew i get out a screw in my hand.???? Please Steinberger need help!!
gimox Posted January 29, 2012 Author Posted January 29, 2012 A possibile solution is.... Set more hight action (2,5 mm at e) and screw the torx of the truss-rod. The fingerboard has not the right curved shape but it sound good. It s not a solution but i can play the guitar. anyone can help me?
gimox Posted May 20, 2012 Author Posted May 20, 2012 A possibile solution is.... Set more hight action (2,5 mm at e) and screw the torx of the truss-rod. The fingerboard has not the right curved shape but it sound good. It s not a solution but i can play the guitar. anyone can help me? It's not a real solution. seems that the trus-rod work only in one sense..... Hey steinberger any HELP?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.