Jump to content
Gibson Brands Forums

J45- Vibration noise under the bridge.


ServantOfGod

Recommended Posts

See those little mother-of-pearl dots on either end of the line of your bridge pins? They typically cover a little bolt that runs through the bridge, then the top and on through the bridge plate. A little nut attaches to the bolt and gives added strength to the bridge attachment. A mirror in the sound hole can verify this or you can reach up in there and feel them.

The problem was quickly solved by change the endpin jack. Thanks!

Link to comment
Share on other sites

See those little mother-of-pearl dots on either end of the line of your bridge pins? They typically cover a little bolt that runs through the bridge, then the top and on through the bridge plate. A little nut attaches to the bolt and gives added strength to the bridge attachment. A mirror in the sound hole can verify this or you can reach up in there and feel them.

I thought they stopped bolting down the bridges and the dots are fake covers now. Am I wrong again???

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...