Magpye2 Posted March 2, 2008 Share Posted March 2, 2008 My Les Paul has been well gigged. Is it possible to get a replacement Switch Washer as the gold writing has worn off mine? and are they easy to fit? I live in the UK so if you know of any stockists that supply them, I would be most gratefull. Link to comment Share on other sites More sharing options...
DoubleSixx Posted March 2, 2008 Share Posted March 2, 2008 If you want to tighten try this tool : http://www.stewmac.com/shop/Tools/Special_tools_for:_Electronics/Toggle_Switch_Wrench.html You may ruin the finish with pliers. The best way to tighten is by taking of the toggle switch cover and holding it while using this tool. If you don't hold it in place you could break the wires. I have one, it's expensive but better than worth the money. I don't know if they ship over seas. E-mail them before buying. Link to comment Share on other sites More sharing options...
retrosurfer1959 Posted March 2, 2008 Share Posted March 2, 2008 any Gibson shop can get you one and there everywhere on ebay from 2 bucks for a plain one to custom graphics or even silver and engraved. most of mine have the paint worn off after a few years also but I quit replacing them years ago. guess I don't mind anymore or just got lazy. Link to comment Share on other sites More sharing options...
Flight959 Posted March 3, 2008 Share Posted March 3, 2008 Hi, Try www.rosetti.co.uk These are the UK Distributors of Gibson Guitars and various other brands. They also have a large selection genuine Gibson spares..... Navagating the site takes a little getting used to.. I have bought loads of stuff of them. If you have bought a Gibby in the uk new from a retailer then its 99% likely it has come from these people. They are very helpful. No I dont work for them. Regards Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.