raveoned Posted March 19, 2008 Share Posted March 19, 2008 Hey there! New to the forum, and a recent Casino owner! The one I bought didn't have a pickguard, but I have one to install. Is the bracket for the bottom section the same as a Les Paul pickguard bracket? Link to comment Share on other sites More sharing options...
RotcanX Posted March 19, 2008 Share Posted March 19, 2008 Pretty much. Link to comment Share on other sites More sharing options...
bluelake07 Posted March 21, 2008 Share Posted March 21, 2008 I took my Casino pickguard off and lost the bracket when I moved. I saw photos of a Les Paul bracket on Ebay and I don't remember the one on the Casino looking like that. You might (and I might) contact Epiphone and see if you can get one from them. Link to comment Share on other sites More sharing options...
sjtalon Posted March 21, 2008 Share Posted March 21, 2008 I just measured my '06 China Lp Std and '06 Korea Casino. The part that goes under the pickguard is about 1/4 inch shorter on the LP, BUT with the slot for the screw, you would be able to line the guard up tight to the pups, i.e. it is long enough. The length of the "tab" from the 90 º to the body screw is about 1/8" LONGER on the LP bracket, but that would just mean the pickguard would be a little higher off the body if used on a Casino. I would think if you bent it slightly you could get it down a little lower if it's a issue. Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.