Swoop Posted January 6, 2009 Share Posted January 6, 2009 What brand/model of locking tuners, if any, are a direct replacement for the standard G-310 tuning machines? I really don't want to have to make new screw holes in the back of the headstock to mount them. Link to comment Share on other sites More sharing options...
AyushPresley Posted January 7, 2009 Share Posted January 7, 2009 I think Grover locking tuners would fit..but i still guess you'd have to make holes for it for the screws to fit..i guess your G310 has about 10mm hole as the G400 and the grovers would fit in there but i guess for the screws you'll need to make holes.!! Link to comment Share on other sites More sharing options...
TWANG Posted January 7, 2009 Share Posted January 7, 2009 If I remember right.. and I may not. g310 didn't come with grovers. and grovers wouldn't fit. look at the pics at allparts.com and you can match the screw hole mounting.. and then email them about the g310.. but if it doesn't have grovers on it now, then like the lp100, grovers wont fit. not without drilling for the screw in bushings... if yours has press fit bushings then it wont fit grovers for sure. TWANG Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.