lengle1981 Posted March 24, 2012 Share Posted March 24, 2012 New to this, but Gonna buy a dot studio off a pal. Was gonna do it up a bit and add a bigsby. Question, will I have to Ground the guitar? To the bridge or tail piece? Not sure which is ground currently, is it the bridge or the tailpiece and if I add the bigsby will I have to change this? Also I've been wanting to put a maestro term on my SG, same as the above, will I have to change the grounding? Link to comment Share on other sites More sharing options...
pfox14 Posted March 24, 2012 Share Posted March 24, 2012 There should be an existing ground wire from the bridge, so no reason to add one for the Bigsby. Link to comment Share on other sites More sharing options...
lengle1981 Posted March 24, 2012 Author Share Posted March 24, 2012 So it'll play as normal without doing anything to the guitar? Would that be the same for both the dot and the SG? Link to comment Share on other sites More sharing options...
stringrazor Posted March 24, 2012 Share Posted March 24, 2012 So it'll play as normal without doing anything to the guitar? Would that be the same for both the dot and the SG? Did just that with my '99 Dot Deluxe. I used a B30 and just the strap button to anchor it. It's been stable for years. before installing the P94 pups that are in it now. Just got a new SG Standard. Been thinking about a vibramate & B5 setup.... Link to comment Share on other sites More sharing options...
angle Posted March 25, 2012 Share Posted March 25, 2012 There should be an existing ground wire from the bridge. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.